i am trying to make a virtual cluster. OBD port doesnt seem to have access to fuel level. , or does it? any ideas, suggestions on how to make a virtual cluster?

i am trying to install keyless entry into my 2004 v70. I am looking for advice. i think there are 4 ways it could be done. 1. find wire on electronic door lock control module, and apply 12v? gnd? 2. find wire on the master switch on the door, and apply 12v? gnd? 3. attach a solenoid plunger attached...

my heat is weak too. So i would like to test the actuators/hinges . below is the image of the blower vent opened up. Under the big white wheel, behind the long rod bottom, is where there would have been a rod that opens up the flow from the blower thru the evaporator in the back, to go thu the heate...

were you able to figure this out? if so, how?

i have an odd problem with engine temperature and radiator fan on a 2004 v70. it makes me think that there are 2 engine temp sensors? is that true? you see -- the radiator fan never comes on, unless i reverse the positive and negative leads. the red and black wires yield 14v accross them. the purple...

could i connect the fan's purple wire to battery hot or ground ... or maybe to the alternator [thinking it would only have voltage when engine is turning?]

i ask this because the fan only seems to work if i reverse polarity to the 2 big wires.