So I checked the relay and it was toast. So I went and got a new one. Right away the fan started working normally. The issues that I have noticed and I dunno if this is normal or not. When I am driving and I hit the throttle any like to speed up I notice my temp via my ODB-II goes up. The needle sta...

I just recently started having a cooling issue where the gauge looks normal but randomly it will flutter and then go up in temp in between hot and the middle. But after a few seconds it goes back down to normal. This all happens most of the time while stopped. I hooked my ODB-II up and saw that it's...

Is there a way to test the IAC valve? I'll double check for vacuum leaks but pretty sure that I replaced all my vacuum lines with silicone ones when I replaced my vacuum tree and o-ring a couple of months ago.

What could be causing my turbo boost issue?

Recently I started getting a 443 and 231 code along with a CEL. After the 443 code I would also no longer get any boost. Once I clear the codes I would have boost for a short period but it would be sporadic and then no boost at all. It happened twice that the 443 and 231 codes would pop up with a CE...

I was wondering if anyone has a turbo control valve they can sell me since mine is bad?

That's what I kinda figured. Oh well since i'm doing it right I just ordered the proper kit based on my engine serial number, fuel injector o-rings, and a new gasket for the throttle body since i'm there I might as well clean it also. Hopefully my parts come in on Friday so I can spend the weekend d...

I recently was replacing all my vacuum lines and decided to replace my intake hose since the PTC kept popping out and wouldn't stay in no matter what. While doing that I found that the hose that goes from the intake to the PCV box was broken in multiple places. I also currently have a small RMS leak...

I have recently started having an issue with engine roughness when driving on the highway at speeds of 55-65 when I go to accelerate at those speeds I notice a lack of power and roughness and also during that time I also get that rotten sulfur smell. I have suspected for a while that a coil pack may...

Well I finally figured out the main reason why . The grease I put on them was causing it to hydraulically lock and not allow it to go any further. Once I tapped it back out and cleaned out all the grease it went right in with no issues. I did decide based on advice from a few others that I didn't re...

So after reading may threads on how to install lower ball joints I got all the require stuff and started the task. Well everything went well with getting the old ones out but when it came to getting the new ones in I could not get them totally down all the way on the one side. Even after tapping the...