Hi Jaquie, Last week on my 98 S70 I replaced my Lo-Beam Headlight Bulbs with new Sylvania H7 ST SilverStar Bulbs, and my Hi-Beam Headlight Bulbs with new Sylvania H7 SU/2 Ultra SilverStar Bulbs. They are well worth it as they turn a dark night in a Rocky Mountain Canyon into a bright day. They are e...

I think this URL will answer all of your questions: http://www.jimrothe.com/volvo/volvo-dynaudio.html
Good luck,
Jim

I ran a compression test today.Cylinders 1,3,4,5 were all between 180 and 185 psi and cylinder 2 had nothing.I ran the test twice to verify the results and they were the same both times.Any thoughts as to what it could be and what should my next move be. The fact that you have no compression can be...

If you do need a new starter there are a few "new" starters for Volvo V70 on eBay for $69.95 plus $15.00 shipping such as: http://cgi.ebay.com/ebaymotors/VOLVO-STARTER-S60-S70-V70-XV-XC90-98-99-00-01-02-03-NEW-/160473693001?pt=Motors_Car_Truck_Parts_Accessories&hash=item255cfa3b49 Good...

I'll be watching this thread as I also have a 98 S70. If everything else lines up you could always cut the hose nipple shorter and use a small aircraft quality hose clamp. Hopefully you'll receive additional info.
Good luck,
Jim

The Equus 3130 will only address the manufacturers enhanced OBD codes. Equus will not even talk about the actual Volvo codes. I spoke with them a few years back and again tonight. Currently all Equus scan products can only speak with the ECM . It is blind to the other modules. The 3130 is available...

You need a BSR PPC to read the Volvo codes and reach all the modules. http://www.ppc-diagnostic.com/ Thanks for the info. I checked and found that the PPC Diagnostic System works with all Volvo from 2001-2007. See: http://www.ppc-diagnostic.com/ I then continued researching and and after talking wi...

Which OBDII Scan Tool will read all of the Volvo “Manufacturer Specific Codes” for my 1998 Volvo S70. I already have several computer based OBDII Scan Software programs such as AutoEnginuity for most Generic Codes plus all of Ford's Manufacturer Specific Codes for my Diesel truck but want a handheld...

I understand that there are two units for this car, one where there is a fuel return line to the tank and it is called a regulator, and one without a return line...I would imagine that this is a pulsation damper...They are both located on the fuel rail... My engine has the Pulsation Damper connecte...

I have spent hours last night and today reading everything that I could find regarding the exact location of the Fuel Pressure Regulator on my 1998 (10/1997 Mfr) Non-Turbo 2WD S70 with a B5254S Engine. I found the Fuel Pulsation Damper located on the left side (Pax Side) of the Fuel Rail. Do you kno...