I'd buy it...that's actual the EXACT car I'm looking for...if you don't buy it, please PM me. Seriously

Thanks for the reply Bill. So when you say all the clips do the same thing, can I just pull some from another panel, and and put then in the missing places (replace gray/white with yellow)? Is the offset of the clip not really an issue, or do I have to replace like with like? I ask because I'd like ...

I'm looking to replace some of the broken door panel clips on my '92 245 and after removing the door panel, I discovered 2 different types of clips. http://i44.photobucket.com/albums/f47/MalibuLX3/DSC_0634.jpg The yellow ones were found in the yellow circles in the picture below. I know these ones a...

I'm looking for the black plastic cap/cover that goes over the bolt for the wiper arm, but have not been able to find anything. Any idea where I might be able to find one, besides someone parting out a Volvo...because those don't seem to exists around me...

So, if I understand this correctly, Black, BASF (Glasurit), and solvent based.

According to Volvo Car Paint Codes

This might sound like I silly questions, but I'm looking at buffing my 1992 Volvo 240 and a couple of people asked me if the paint is single stage or base/clear, and I'm not sure. I always assumed its base/clear, but I'm not sure. And now are a quick search, I'm lead to believe it's single stage.

Good choice for the power source. Fuse 13 is rated at 16 amps so, depending on the size of the bulbs, you may need to reduce that. Usually the bulbs are 55 watts so a 10 amp fuse would be enough. When I had my 240 and 740 I mounted the fog lamps above the bumper. I used round lamps to offset the re...

That is all you need. Where are you getting your 12v coming into the switch? Bill. Great, thanks Bill. I pulled 12V directly off an empty terminal on the fuse panel. Fuse 13 to be exact, which appears to be for heated seats...which I don't have... :mrgreen: Now I just need to figure out what lights...

I'm install front fog lights on my Volvo 240, and I've got everything in place, but the switch. I should arrive sometime next week. But in the mean time, I'd like to have everything wired up and back in place, so when the switch shows up, I can just plug it in and be on my way. My question is, what ...

Bill,

Thanks for the reply, I'll check into that stuff.