Search found 46 matches
- 15 Jan 2012, 15:53
- Forum: Volvo Classifieds
- Topic: Parting Out
- Replies: 0
- Views: 369
Parting Out
Parting out a 94 volvo. Go to http://carpartpawnshop.webs.com to see the listing. Go to forums then Volvo
- 12 Jan 2012, 17:49
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: Stalling out after filling tank 94 850
- Replies: 8
- Views: 787
Re: Stalling out after filling tank 94 850
Rule #1...Always start with the simplest solution. Fuel filter swap and running great. I changed it last year and didn't expect it to be a problem already
- 06 Jan 2012, 16:12
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: Seafoam cured my ticking lifter?
- Replies: 11
- Views: 9055
Re: Seafoam cured my ticking lifter?
try it rspi, the 1/3 gas, intake and crank. itll help. dont let the idle die, let it sit for 15 minutes, and then DRIVE to blow all that crap out the exhaust. And to OP, yes it probably helped. but on your next oil change, i recommend doing all three. you get more power, better fuel economy, and it...
- 05 Jan 2012, 18:54
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: Bosch Platinum Spark Plugs
- Replies: 8
- Views: 5446
Re: Bosch Platinum Spark Plugs
@ Ozark Lee -- I know this is an old post but I'm glad I found it as I just purchased a set Bosch Platinum 2's. I think I will return them for something different. Doesn't sound like you had too much luck with them
- 05 Jan 2012, 16:43
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: Seafoam cured my ticking lifter?
- Replies: 11
- Views: 9055
Seafoam cured my ticking lifter?
After reading some of the seafoam posts decided to give it a try in the crankcase and tank. I should preface this by saying my car had a terrible tick at all speeds that only went away when the radio got loud enough. I added seafoam to the crankcase today and after 30 miles the tick is gone. And it ...
- 02 Jan 2012, 09:54
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: PVC and EGR cleaning now firing on only 4 cylinders
- Replies: 5
- Views: 785
Re: PVC and EGR cleaning now firing on only 4 cylinders
Note to self...make sure I plug wiring back in that I unplug. #2 cylinder injector was still unplugged
- 01 Jan 2012, 22:11
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: PCV Location
- Replies: 8
- Views: 1089
Re: PCV Location
The motor is pretty wore out. It sounds like someone dropped bb's down the oil cap. It's been that way for 30,xxx miles which is the entire time I've owned it. I have another motor ready to go when this one lays down. Hope it last til spring!!!
- 01 Jan 2012, 16:52
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: PVC and EGR cleaning now firing on only 4 cylinders
- Replies: 5
- Views: 785
Re: PVC and EGR cleaning now firing on only 4 cylinders
I can try that. I didn't realize you could do that with no cel. Good to know
- 01 Jan 2012, 16:35
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: PVC and EGR cleaning now firing on only 4 cylinders
- Replies: 5
- Views: 785
Re: PVC and EGR cleaning now firing on only 4 cylinders
It's not throwing any codes.....Only drove it around a mile. It is getting spark so hope it's a fuel problem. I will pull the fuel rail back off in the morning. All the blue injector seals are present but they also have a small o-ring on them that could've came off.
- 01 Jan 2012, 16:20
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: PVC and EGR cleaning now firing on only 4 cylinders
- Replies: 5
- Views: 785
PVC and EGR cleaning now firing on only 4 cylinders
Changed out the pcv separator. All ports looked good. Egr was clean and is functioning. For some reason started her back up and it was running rough. Pulled plug wires one by one and there is a cylinder not firing. I'm thinking maybe I damaged one of the injectors or something....Maybe it got dirt o...






