Mine definitely has something like that, it is definitely not straight from bearing to tranny. I will just order the visco shaft. Thanks.

hmm I think mine is not as wide but bigger around. Thanks for the pic!

Ok, there is a unit in that space but I'm not sure if it fits those dimensions. I will snap a pic tomorrow and post it here.

W/O the visco-cluth does the axle go straight from the bearing housing the the tranny or is there a round piece there either way? It looks like a thick saucer.

Thanks!

How can you tell if your car has a viscous clutch? I am trying to replace my shaft on the passenger side and I'm not sure what to look for.

There is a big, heavy looking thing between the transmission and the bearing mount that bolt to engine. Is that the visco clutch?

Great, thanks! Figured it would be on the top of the dash. Looks like the unit I checked does have a sun sensor but only for intensity to adjust the temp of the A/C. Seems a little ahead of its time for 2000.

For those of you who saw my last post I have a small update. I also have a question about my headlights. So I got the wiring and vacuum lines all dialed in. The car runs awesome! I took it down and got it smogged and registered without a hitch. Thanks for the forum and the excellent help I received ...

Update:

The car is responding to throttle and idling. It has a very irregular idle and seems like it's missing on a cylinder or two. When I put it to ~3k rpm it smoothers out significantly.

While running the car pops the codes P0300 P1355 P1357 P1359 P1361

Any ideas?

Good news, bad news. I bolted everything up and got my '00 T6 "running". I need some advice, the car would start and run pretty choppy then get worse and eventually die. It would die after 5-8 seconds of bad running. Here is what I think it is: I had 5/8 tank in the car and it has been sit...

I give up. Ordered all the other parts including a new box. I'm just going to fabricate my own connection. Any ideas/suggestions to help me brainstorm? Was thinking I could drill an "accent" hole in the top of the box itself :lol: , next to the main connection, and run the hose or a small ...

ok, thanks for looking. I'm asking some salvage yards if they have it.

If anyone is curious, tascaparts.com has the pcv tank for $27, $10 shipping though but doesn't increase with additional parts.