Search found 9 matches
- 15 May 2016, 06:42
- Forum: 240, 740, 760, 780, Bertone, 940, 960, V90, S90
- Topic: URO Defective Fuel Senders
- Replies: 3
- Views: 1314
URO Defective Fuel Senders
URO is selling defective fuel senders; part number 1367253. The float leaks: air escapes, fuel gets into the float replacing the air, the float sinks to the bottom of the tank, and the fuel gauge reads empty even when the tank is full. The holes appear to be under the metal arm it is attached to. So ...
- 24 Feb 2016, 10:58
- Forum: The ETM Room
- Topic: Haldex Electrical Resistance
- Replies: 5
- Views: 6799
Re: Haldex Electrical Resistance
Check Engine light was on.
Occasionally heard a “clunk” sound typically followed by ABS & Traction warning lights.
Although there were like 20 codes set, dealer could not find anything wrong.
Dealer cleared codes; Check engine light came back on the next day.
Car would not pass state inspection with ...
Occasionally heard a “clunk” sound typically followed by ABS & Traction warning lights.
Although there were like 20 codes set, dealer could not find anything wrong.
Dealer cleared codes; Check engine light came back on the next day.
Car would not pass state inspection with ...
- 24 Feb 2016, 04:53
- Forum: The ETM Room
- Topic: Haldex Electrical Resistance
- Replies: 5
- Views: 6799
Re: Haldex Electrical Resistance
Great - thanks for the info.
My suspect motor also has ~2.2 ohm terminal to terminal.
But, either terminal to housing is about 30K ohms. Wire insulation breaking down maybe?
My suspect motor also has ~2.2 ohm terminal to terminal.
But, either terminal to housing is about 30K ohms. Wire insulation breaking down maybe?
- 23 Feb 2016, 11:41
- Forum: S60, V70, V70-XC 2001-07
- Topic: 2006 XC70 CAN Problem? Many Many Codes
- Replies: 4
- Views: 1804
Re: 2006 XC70 CAN Problem? Many Many Codes
Just wanted to do a follow-up on this issue.
I went through car & removed, and in some cases cleaned, every CAN module & connector.
Car has gone 2 months now without problems or codes.
BUT - I am beginning to think rear differential hydraulic Haldex motor is failing and that may be root cause of ...
I went through car & removed, and in some cases cleaned, every CAN module & connector.
Car has gone 2 months now without problems or codes.
BUT - I am beginning to think rear differential hydraulic Haldex motor is failing and that may be root cause of ...
- 23 Feb 2016, 11:30
- Forum: The ETM Room
- Topic: Haldex Electrical Resistance
- Replies: 5
- Views: 6799
Haldex Electrical Resistance
2006 XC70
I suspect that rear differential pump motor is starting to fail. I did your test of putting battery voltage to motor terminals & runs ok.
Do you know what the electrical resistance is supposed to be for both:
Motor terminal to terminal ?
Motor terminal to motor housing?
Thanks!
I suspect that rear differential pump motor is starting to fail. I did your test of putting battery voltage to motor terminals & runs ok.
Do you know what the electrical resistance is supposed to be for both:
Motor terminal to terminal ?
Motor terminal to motor housing?
Thanks!
- 07 Jan 2016, 10:44
- Forum: S60, V70, V70-XC 2001-07
- Topic: DEM / AOC / Haldex Pump Electrical Resistance
- Replies: 0
- Views: 2217
DEM / AOC / Haldex Pump Electrical Resistance
--> STILL NEED HELP WITH THIS PROBLEM. <--
*** CAN ANYONE MEASURE THE ELECTRICAL RESISTANCE FROM EITHER MOTOR CONNECTOR TO THE MOTOR HOUSING (ON A GOOD MOTOR) ????
2006 XC70
As part of trying to solve various intermittent problems, I measured the electrical resistance of the Differential Pump Motor ...
*** CAN ANYONE MEASURE THE ELECTRICAL RESISTANCE FROM EITHER MOTOR CONNECTOR TO THE MOTOR HOUSING (ON A GOOD MOTOR) ????
2006 XC70
As part of trying to solve various intermittent problems, I measured the electrical resistance of the Differential Pump Motor ...
- 27 Oct 2015, 06:48
- Forum: Car Talk & MVS Itself
- Topic: Painting Headlight Lens
- Replies: 4
- Views: 2653
Painting Headlight Lens
Headlight lens’ are totally frosted over – again.
Last time I cleaned and polished with Simichrome and put on a silicone “wax.” It was about 5 hours work, but they looked new.
Two years later they look just as bad & maybe even worse!
On Youtube I saw someone recommending, after polishing, coating ...
Last time I cleaned and polished with Simichrome and put on a silicone “wax.” It was about 5 hours work, but they looked new.
Two years later they look just as bad & maybe even worse!
On Youtube I saw someone recommending, after polishing, coating ...
- 16 Oct 2015, 10:36
- Forum: S60, V70, V70-XC 2001-07
- Topic: 2006 XC70 CAN Problem? Many Many Codes
- Replies: 4
- Views: 1804
2006 XC70 CAN Problem? Many Many Codes
2006 XC70 is having a bunch of intermittent CAN problems (I think).
Feels like brakes are applied (Traction Control), PRND indicator on IP shows a dash, ABS light comes on, DIM displays Transmission Service Required, and other various indications. Check Engine light stays on. Displays a gazillion ...
Feels like brakes are applied (Traction Control), PRND indicator on IP shows a dash, ABS light comes on, DIM displays Transmission Service Required, and other various indications. Check Engine light stays on. Displays a gazillion ...
- 03 Sep 2012, 14:12
- Forum: S60, V70, V70-XC 2001-07
- Topic: 2006 XC-70 Tires
- Replies: 2
- Views: 729
2006 XC-70 Tires
2006 XC-70 with Bridgestone Ensignium SE 200 size 215 65 R16 tires need replacement & I’m not really happy with handling.
Considering going wider to 225 65 R16 Goodyear Eagle LS2 or Michelin MXV4.
Will 225 fit without hitting?
(I know this tire will be a little taller and actual speed may be higher ...
Considering going wider to 225 65 R16 Goodyear Eagle LS2 or Michelin MXV4.
Will 225 fit without hitting?
(I know this tire will be a little taller and actual speed may be higher ...






