Not sure on pricing over there, but in Australia that would be a cheap car.anything that is not to rusty and complete is generally worth about $8000 to $10000.

Hi dan where is the clinking noise coming from? A big part of servicing these old cars was tightening suspension bolts, front cross member and rear torque arm in particular.

Did you change the spark plugs? What did the old one look like?did this start suddenly or has it got worse over time?
You are ok to disconnect the pulse air system, usually it would leak exhaust gas from the valves. I have removed the valves and blanked them with small coins.

You should simply be able to run power from the battery to the ignition coil positive post. Then to start just put a screw driver across the starter motor positive post to the small starter wire,the aeon should have a manual fuel pump on left hand side in front of the distributor .
You can check the ...

Hi
You remove the circlip holding the original push rod in place and transfer it and the retaining washer over to the new master cylinder. Presuming you are using the same bore size cylinders
Rob

Hi Carl, Just do it, plenty of parts available and lots of help available. A rewarding car to restore and drive with a couple of easy mods.
Rob

Thanks for the help gents. It was the oil cooler on the back of the sump. Volvo only wants $710.00 for one, guess I look on ebay.

Hi all, I was driving my 2003 v70 t5 and noticed the oil light coming on around corners,I pulled into a service station and found oil literally spewing from the coolant reservoir. The car is running perfectly with no issues. Has any body had this problem. Surely if it was cylinder head I would have ...

Hi Robert just came across this after googling p1800 brake upgrade. It looks awesome. Can you please give me an idea of price ? I believe you are also doing a rear brake conversion?

I am looking at fitting a ford windsor alloy headed engine into my 66. I chose it because of weight and size.
Cheers ...