Search found 5 matches
- 10 Jun 2019, 22:10
- Forum: XC90 1st gen 2003-2014
- Topic: 2008 3.2 stalls/dies/won't start
- Replies: 25
- Views: 8826
Re: 2008 3.2 stalls/dies/won't start
Let me know if you were able to fix this as I’m having the same repeated issues.
- 10 Jun 2019, 21:54
- Forum: XC90 1st gen 2003-2014
- Topic: Fuel pump/module woes
- Replies: 1
- Views: 485
Fuel pump/module woes
Hey guys, could use some guidance here. My ‘07 xc90 v8 is in the shop again for the 4th time in 5 months for fuel pump issues. Back in 11/18, car wouldn’t start, would crank but not start up. Took it to Mechanic A who stated it was a bad fuel pump. $1,200 later it’s fixed...for one day, then fails a...
- 09 Sep 2018, 20:44
- Forum: XC90 1st gen 2003-2014
- Topic: 2007 v8 ignition coil harness replacement
- Replies: 6
- Views: 2785
Re: 2007 v8 ignition coil harness replacement
Search Ebay for "denso ignition coil connector" I think the first one tht comes up with connector, 4 terminals, 4 rubber wire seals is the right one. What about this? https://www.amazon.com/GooDeal-Connector-Harness-Ignition-90980-11885/dp/B01BEVKLHA/ref=pd_sim_263_4?_encoding=UTF8&pd...
- 09 Sep 2018, 20:43
- Forum: XC90 1st gen 2003-2014
- Topic: 2007 v8 ignition coil harness replacement
- Replies: 6
- Views: 2785
Re: 2007 v8 ignition coil harness replacement
The wire broke off from the metal pin. The pin is still stuck inside the connector.RickHaleParker wrote: ↑09 Sep 2018, 19:18 Hold your horses, harness are real expensive, replacing a harness is a last resort.
Did the metal pin come out of the connector or did you break the wire off at the metal pin?
- 09 Sep 2018, 16:55
- Forum: XC90 1st gen 2003-2014
- Topic: 2007 v8 ignition coil harness replacement
- Replies: 6
- Views: 2785
2007 v8 ignition coil harness replacement
Hey guys, trying to find a replacement coil harness. When I was replacing a spark plug, I pulled off the connector to the coil pack and must have pulled out a wire from the connector.
Does anyone have a part number? I can’t find one.
Does anyone have a part number? I can’t find one.






