Help me out guys, Behind the oil fill spout, there is a round cap the same size as the oil fill spout. Every time I lift the hood it has a ring of oil on it. After driving just enough to reach operating temperture, I get oil smoke coming up from under the hood very time I stop. I am losing about a q...

Guys, I've got a new oil leak and can't find where its coming from. Its not leaking alot but its dripping on the back side of the motor making it smoke up from under the hood. On the top of the motor there is a round cap behind the oil fill spout and it looks as if the leak might be coming from ther...

I would be tempted to stuff it full of wet towels and weld from the outside. This would at least protect the electricals. Good luck and let us know what you did.

Is there any way of getting behind the door stay on the fender side? If I drop that half into the fender area can I get it back?

Mij has it right. Once the torx bolt is removed I could lose that half of the door stay into the fender area,

Sorry if i havn't been clear. I would post a picture, but Idon't have a way to do that right now. The top and bottom hinge are fine. In between is the door stay that bolts to the door, and is welded to the body. the stay that I'm talking about is two pieces and has a torx bolt that connects the the ...

just got home from work and its a beautiful day and still have a little light left. Started poking around and thought I'd do the job right now. Well that was before I started to take it apart. My door stay was welded completlyaround and has now broken all the way around. When I take the torx bolt ou...

I have just taken another look and I don't like what I see. This thing has surely been welded in the past and although the welder must have been careful enough no to damage any electrical, it doesn't look as if he was a very good welder. I've got to get the door off this wekend and see if i have eno...

You guys did such a good job helping me out last weekend when I changed my thermostat and coolant sensor, that I thought I would fix my popping door stay this weekend. I found the instructions on how to drill and bolt, but I ran into a problem when I took a look at it last night. The previous owner ...

Thanks guys for all the help. I got started a little late today. Temp in Charlotte this morning was in the 20's. Had no luck finding a long torx at sears, harbor freight tool, home depot or lowes. I did find at auto zone an "L" shaped set of torx similar to a set of allen's. They were just...