Here's the deal: 4 brand new tires, wheels balanced, both tie rod ends replaced, 4-wheel alignment done. The damn thing is still shaky at 80km/h + it starts at the lower speeds as almost an 'up and down' shake...I can feel it very slightly below 80, but on the highway, the whole car is kinda shakey,...

Are there differences in stock front suspensions (shocks and or springs) between V/S70, xc70, R
?

I have the stock v70r exhaust...well its the dual so i assume not original to the car so 99+ i guess?

Anyways, i'm getting only exhaust coming out of the right side outlet, literally none coming out of the left side. Is this typical? Is there any way to even this out?

No one?

I'm hearing a clear water rushing of sloshing sound when accelerating and braking. Sounds like it's coming from drivers side floor area.

I had the sunroof drain issue on the drivers side but that is now fixed and the carpet seems dry...

So where is this water and how do I drain it out?

OK will do - I think I just assumed lambda had to do with O2 stuff - but doing some searching and just figured out its basically a CEL.

Thanks guys - I'll try and pull the codes and post them up!

-b

My lambda light would periodically come on before and now its pretty much on solid all the time.

any idea what would cause this? is this an O2 sensor thing?

my code reader won't show me what codes its throwing

So if i'm replacing the bolts altogether for this mod, I shouldn't need to know thread pitch and all that stuff when I go to get new bolts right? here it says "Match the thread pitch of the bolt to the original nuts that fastened the shocks to the lower control arm." https://www.fcpeuro.co...

Thanks Neil.

So if they're not actually bolts and they're welded onto the bracket, how do they come out?

How is this mod done with new bolts?

Hey guys,

I'm hoping to find specs for drop bolts for my nivomats. Not looking to go crazy low, just a bit lower in the back to get rid of a bit of rake.

Looking to be able to walk into the hardware store knowing exactly what I need without removing the current ones first