Hi, All,
I have had a S80 T6 for a week. Yesterday evening I found that whenever I press the brake peddle after I've started the car, there is a noise coming from under the shifter. I am sure the noise had not been there before. But this only happens when the shifter is in Park. And when I am driving everything is ok. Should I be concerned with this?
Thanks.
S80 noise when brake pressed at Park
- matthew1
- Site Admin
- Posts: 14472
- Joined: 14 September 2002
- Year and Model: 850 T5, 1997
- Location: Denver, Colorado, US
- Has thanked: 2652 times
- Been thanked: 1245 times
- Contact:
Sounds like the PNP switch, or whatever the S80's equivalent is called, is emitting less-than-strong electrical signals regarding its location. I wouldn't worry about it, but if it bugs you, you might want to move your shifter from P to L3 20 or 30 times and try to 'clean' the electrical contacts this way.
Help keep MVS on the web -> click sponsors' links here on MVS when you buy from them.
Also -> Amazon link. Click that when you go to buy something on Amazon and MVS gets a cut!
1998 V70, no dash lights on
1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace
2004 V70 R [gone]
How to Thank someone for their post

Also -> Amazon link. Click that when you go to buy something on Amazon and MVS gets a cut!
1998 V70, no dash lights on
1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace
2004 V70 R [gone]
How to Thank someone for their post

Hi, thank you very much for the repy.
I also found out that it happens in two other situations: when I turn the ignition key, or when I lift the brake at a stop sign. It sounds like some lock being released.
So what's the mechanism of this noise?
Zhian
I also found out that it happens in two other situations: when I turn the ignition key, or when I lift the brake at a stop sign. It sounds like some lock being released.
So what's the mechanism of this noise?
Zhian
- matthew1
- Site Admin
- Posts: 14472
- Joined: 14 September 2002
- Year and Model: 850 T5, 1997
- Location: Denver, Colorado, US
- Has thanked: 2652 times
- Been thanked: 1245 times
- Contact:
Someone correct me if I'm wrong, but I believe the mechanism is there to check that the trans is in Park before starting the engine, and to check that the brake is depressed before shifting from Park.
Help keep MVS on the web -> click sponsors' links here on MVS when you buy from them.
Also -> Amazon link. Click that when you go to buy something on Amazon and MVS gets a cut!
1998 V70, no dash lights on
1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace
2004 V70 R [gone]
How to Thank someone for their post

Also -> Amazon link. Click that when you go to buy something on Amazon and MVS gets a cut!
1998 V70, no dash lights on
1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace
2004 V70 R [gone]
How to Thank someone for their post

-
bill740
- Posts: 11
- Joined: 5 June 2003
- Year and Model: 2006 V70, 1990- 740
- Location: nrothern cal.
- Been thanked: 1 time
normal opperation the shift lock solenoid is engageing and dis engageing when brakeing at app 5mph the lock will release this is to prevent engagement of reverse while car is moving you will feel a slight clunk in the shifter
fun to drive
-
- Similar Topics
- Replies
- Views
- Last post
-
- 13 Replies
- 2019 Views
-
Last post by misha
-
- 0 Replies
- 334 Views
-
Last post by divinedavis






