terrible skweaking after pad replacment

gabewillwin · Post by **gabewillwin** » 09 Aug 2005, 10:53

thanks for all the replys everyone. to answer some questions, i did not use OEM pads i used somthing else (i know i know..), but the breaks are shimmed and greased. in fact i took the pads back out and even cleaned and applied that terrible anti skeak grease which worked for about a day and a half. more than likley i will simply need to buy volvo pads with volvo shims, because i just cant stand the ugly stares!! thank you for all the info

WGRoper · Post by **WGRoper** » 10 Aug 2005, 09:03

Mine squeeked terribly with OEM pads, switched to PBR Deluxe with Syn-Glide grease and teflon coated shims (all from IPD) and no more squeek.