Misfiring at full thottle

JbsRedR · Post by **JbsRedR** » 27 Mar 2011, 19:13

Engine starts to hesitate and stops pulling. Never experienced this issue ever but also never had as many mods. Wondering fuel injectors fuel pump or spark plugs. No check engine light nothing runs smooth otherwise and idles perfect

Post by **jblackburn** » 28 Mar 2011, 17:00

Might be a helpful test to hook up a fuel pressure gauge and get some readings. A bottle of Techron run through your tank wouldn't hurt the injectors, either.

When were your plugs last replaced, what kind are you using, and what's the gap set to?

Post by **tjts1** » 28 Mar 2011, 18:12

Change the plugs first.

Alecw81 · Post by **Alecw81** » 31 Mar 2011, 21:11

I had this issue after I changed my plugs, wires, cap, rotor.

In my case it was the coil.

JbsRedR · Post by **JbsRedR** » 02 Apr 2011, 11:34

Thanks for all your responses getting my car back Monday. I will immediately check and change spark plugs if needed first. If everything seems fine will def add some injector cleaner and look into replacement coil. What do you think of the MSD setup or ipds? It is definitely at a high rpm that I am seeing the issue I am very excited to get the intercooler and 2.5 pipework just want to prevent any issues that obviously could cause detonation

JbsRedR · Post by **JbsRedR** » 01 Jun 2012, 14:08

Sorry for the late response but issue has been resolved. Changed my cap, rotor and plugs ( auto lite Iradium gap set to .28 ) car is pulling so damn hard though I have to upgrade my FMIC clamps to some HD ones. This site kicks ass!! On order now msd coil and IPD wire set. Maybe I'll treat myself to a chassis dyno soon. So excited to get some actual numbers. Whoo hoo my R will be cruising down the beach this weekend with a huge smile on my face!

Post by **JRL** » 01 Jun 2012, 16:07

*****