Fitting Roof spoiler - 2009 V70

PaulV70 · Post by **PaulV70** » 29 Mar 2011, 12:47

Hi guys,

I have a 2009 Volvo V70, and have bought the OEM spoiler which mounts to the top of the tailgate/back of the roof. I was wondering if there is a fitting guide, as although it can't be hard it appears that I need to drill two holes. Is there a stencil which can be used to do this to get them in exactly the correct location?

Thanks,

Paul

FCPEURO · Post by **FCPEURO** » 30 Mar 2011, 16:20

When I installed the spoil on my mazda, I took some stink stuff and put it in each screw hole, then put the spoil on the car and the stink stuff stuck to were the holes needed to go.

Post by **JRL** » 30 Mar 2011, 18:20

Ask on www.XC70.com

A few there have done it

PaulV70 · Post by **PaulV70** » 31 Mar 2011, 02:27

Thanks for the replys, I looked at that site and it was helpful.

For anybody else doing this, open the boot lid and you will see the positions marked to drill 4 holes (2 each side). The spoiler has two bolts moulded into it, and these poke through two of these holes, and it has two threads in it, which you screw bolts into through the other two holes.

Easy job.