SC901, C70 4x100w Amp, iPod & Aux in and all wiring needed*

Post by **ojdorson** » 09 Jul 2011, 14:34

My hastily made video. It is by no means a comprehensive guide, just a quick overview.

c70_lindsay · Post by **c70_lindsay** » 09 Jul 2011, 21:16

Hi Cool write up. Could you give more info on how to wire the 6cd input to an aux in, pictures would be great. I spent $300 to get a mp3 input wired to work through the radio antenna and it sounds like trash. Thanks

Post by **ojdorson** » 10 Jul 2011, 10:23

c70_lindsay wrote:Could you give more info on how to wire the 6cd input to an aux in, pictures would be great.

I have a direct Aux in. There are a few models available. As this is a "For Sale" thread, I'll sell you mine for $40 shipped with all the related wiring and the user's manual. You need to wire it in to 12V (constant), !2V switched (ignition) and ground.

Post by **burnout8488** » 10 Jul 2011, 12:05

You have PM

Post by **ojdorson** » 10 Jul 2011, 21:38

Everything except the amp and the DIN cable is sold. Since I pulled it out, I'm going to detail what it takes to wire up your own pass-through SC-901 retrofit harness in a write-up shortly.

lttrcrrr95 · Post by **lttrcrrr95** » 08 Feb 2020, 14:17

Question : Do you wiring the power from the amp straight to the battery? Ground to seat bolt, two power lines to battery with 40 amp fuses inline? I have an 850 was going to set up amp and install sc900 right to my 850. But the sc900 has to use amp. I have the din cable to go from amp to sc900. Was just going to plug in sc900 to my 850 connector. But not sure if powering the amp.

Bill

SC901, C70 4x100w Amp, iPod & Aux in and all wiring needed*

Re: SC901, C70 4x100w Amp, iPod & Aux in and all wiring need