Thank you very much for posting this online. I however just scraped off the melted parts (I figured new bulbs will end up melting again-same problem). My turn indicators/hazards are now working perfectly.lindy8_man wrote:Mystery Solved!
...two electrodes on the bottom that have solder contacts. The solder melted together, and all those 12 volts go in the direction of least resistance...
S90 Turn Signal flasher relay location?
Re: S90 Turn Signal flasher relay location?
- billofdurham
- MVS Moderator
- Posts: 6507
- Joined: 2 February 2006
- Year and Model: 855, 1995
- Location: Durham, England
- Been thanked: 5 times
Welcome to Matthew's Volvo Site.
It is good to know that someone knows how to search for answers. Glad it helped.
Bill.
It is good to know that someone knows how to search for answers. Glad it helped.
Bill.
Work was good - retirement is better.
1996 850GLT 2.5 20v Estate Manual.
1995 Peugeot Boxer 2.5Tdi Autosleeper.
Previously:
1984 244DL, Manual, Beige.
1987 744GLE, Manual, Green.
1991 960 3.0 24v, Auto, Silver.
1994 940T Wentworth, Auto, Blue.
1996 850GLT 2.5 20v Estate Manual.
1995 Peugeot Boxer 2.5Tdi Autosleeper.
Previously:
1984 244DL, Manual, Beige.
1987 744GLE, Manual, Green.
1991 960 3.0 24v, Auto, Silver.
1994 940T Wentworth, Auto, Blue.
-
Firebreather92
- Posts: 1
- Joined: 28 January 2019
- Year and Model: 1998 s90
- Location: Indiana
Hey guys I'm starting to get a little agitated because I've looked by the hazard switch I've looked in the fuse boxes I cannot find the turn signal relay if anyone can help me find it I have a 1998 Volvo S90. If you're able to point me in the right direction I would greatly appreciate it. I did notice once I disconnected the hazard switch then plugged it back in it worked so could it be the hazard switch causing the problems and not a turn signal relay.
-
lummert
- Posts: 1381
- Joined: 29 January 2008
- Year and Model: 760 1988
- Location: Portland Indiana, USA
- Been thanked: 26 times
The Hazard Switch/ turn signal relay are combined into this 5 inch long Hazard switch assembly on my 1988 Volvo 760 Turbo Wagon. My turn signal had failed, but the hazard lights still worked. Replacing the Hazard Switch cured the issue.
1988 Volvo 760 Turbo Wagon
-
dm635
- Posts: 140
- Joined: 16 January 2008
- Year and Model: '96 965
- Location: Lou. Ky.
- Been thanked: 14 times
I have an '87 6 series BMW. I know for a fact that the turn signals do go through the hazard switch. If there is a problem with the signals it very well could be related to the hazard switch. I found this out by accident while doing some work and went for a drive with the hazard switch disconnected.
96-964
09-V70
05-325i
86-635CSi
Previous- 83 245T, 84 242, 85 242T, 92 960, 94 960, 95-964, 95-945, 91-780t, 96-960, 98-XC, 91-745,
09-V70
05-325i
86-635CSi
Previous- 83 245T, 84 242, 85 242T, 92 960, 94 960, 95-964, 95-945, 91-780t, 96-960, 98-XC, 91-745,
-
ramseykira91
- Posts: 1
- Joined: 2 December 2019
- Year and Model: 1998 Volvo s90
- Location: Washington
I was also having the same problem with my 98 s90 and thanks that is forum I fixed mine for 10$ thank you so much. The mechanic was going to charge me $120 an hour. You guys saved me at least $110. Thank you so much happy holidays and God bless!
-
lummert
- Posts: 1381
- Joined: 29 January 2008
- Year and Model: 760 1988
- Location: Portland Indiana, USA
- Been thanked: 26 times
You're welcome. With my 1988 760, the turn signals didn't work but the hazard flasher did. This is what caused my confusion. I now carry a spare hazard switch.ramseykira91 wrote: ↑02 Dec 2019, 21:02 I was also having the same problem with my 98 s90 and thanks that is forum I fixed mine for 10$ thank you so much. The mechanic was going to charge me $120 an hour. You guys saved me at least $110. Thank you so much happy holidays and God bless!
1988 Volvo 760 Turbo Wagon
-
- Similar Topics
- Replies
- Views
- Last post






