Brake Squeal WTD?
- E Showell
- Posts: 3275
- Joined: 16 October 2008
- Year and Model: ‘07 S80 3.2
- Location: Long Valley, N.J.
- Has thanked: 37 times
- Been thanked: 111 times
Re: Brake Squeal WTD?
I have used Akebono pads to good, squeal-free effect for many years.
'98 V70 NA FWD 5 spd, silver sand metallic (sold)
'99 V70 NA FWD Auto, dark blue (sold)
'99 S70 NA FWD Auto, black (sold and resurrected -- Don't cry for me Argentina . . . )
'07 S80 3.2 FWD Auto, Barents Blue Metallic
'06 V70 R AWD Auto, Sonic Blue Metallic (sold)
'04 XC70 Ruby Red Metallic (sold)
'95 855 auto (sold)
'86 245 manual (sold)
'05 V70 T5 M (totalled)
'06 V70 FWD Auto (totalled)
'02 Honda Insight CVT
‘04 Honda Insight CVT — “Yesterday’s car of tomorrow” (sold)
‘06 Honda Insight CVT
'99 V70 NA FWD Auto, dark blue (sold)
'99 S70 NA FWD Auto, black (sold and resurrected -- Don't cry for me Argentina . . . )
'07 S80 3.2 FWD Auto, Barents Blue Metallic
'06 V70 R AWD Auto, Sonic Blue Metallic (sold)
'04 XC70 Ruby Red Metallic (sold)
'95 855 auto (sold)
'86 245 manual (sold)
'05 V70 T5 M (totalled)
'06 V70 FWD Auto (totalled)
'02 Honda Insight CVT
‘04 Honda Insight CVT — “Yesterday’s car of tomorrow” (sold)
‘06 Honda Insight CVT
-
Scott_850T-5
- Posts: 3
- Joined: 15 April 2013
- Year and Model: 850 T-5, 1997
- Location:
Mileage wise I'd say I'm over the 20-30 mark at this point. and I didn't do a full flush with the swap out but I did about 6 months ago, so I thought I'd be ok. Just got home and she was doing it all the way back to the house. I'm worried I'm going to warp my new rotor, its not glowing but I can feel the heat radiating off it.
**update**
so it was the backer plate. a bent it away from the rotor and got 90% of the noise out. I'll tear the whole thing down and fix it next weekend, for now I'll live with the noise. Only happens now when making a sharp left turn. It must be warped enough to be getting manipulated by the end of the control arm when the wheel is turned.
Thanks for the common sense reply. Ohh, and I replaced the electrical line to my ABS sensor and all the warning lights have gone off. Got the line out of a car at the junk yard for nothing, saved myself 180$ (quote from a local shop).
cheers
-Scott
**update**
so it was the backer plate. a bent it away from the rotor and got 90% of the noise out. I'll tear the whole thing down and fix it next weekend, for now I'll live with the noise. Only happens now when making a sharp left turn. It must be warped enough to be getting manipulated by the end of the control arm when the wheel is turned.
Thanks for the common sense reply. Ohh, and I replaced the electrical line to my ABS sensor and all the warning lights have gone off. Got the line out of a car at the junk yard for nothing, saved myself 180$ (quote from a local shop).
cheers
-Scott
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 459 Views
-
Last post by Fish stick88
-
- 1 Replies
- 441 Views
-
Last post by kahl






