Login Register

brakes pulsing and clicking

Post Reply
eikeeg
Posts: 14
Joined: 14 Feb 2006, 13:12
Year and Model:
Location: england

Post by eikeeg »

1998 V70 10 valve. ABS light came on and ABS sensor replaced - light out, all okay. EXCEPT still got pulsing on braking and sometimes a clicking sound as I came to a stop. Remembered hearing a slight oscillating feint sound when coasting ( from wheels ?) but thought it was nothing. Disconnected the ABS pump fuse, brakes fine, no pulsing, no ABS light, car drives well and stops well. Am worried that changing abs sensor initially was not the entire problem. Is it likely to be a worn rotor ? A weak spring? Any help much appreciated.

xHeart
Posts: 3321
Joined: 03 Dec 2011, 08:05
Year and Model: 2.0/3.2
Location: Great Lakes - USA
Has thanked: 116 times
Been thanked: 119 times

Post by xHeart »

eikeeg wrote:1998 V70 10 valve. ABS light came on and ABS sensor replaced - light out, all okay. EXCEPT still got pulsing on braking and sometimes a clicking sound as I came to a stop. Remembered hearing a slight oscillating feint sound when coasting ( from wheels ?) but thought it was nothing. Disconnected the ABS pump fuse, brakes fine, no pulsing, no ABS light, car drives well and stops well. Am worried that changing abs sensor initially was not the entire problem. Is it likely to be a worn rotor ? A weak spring? Any help much appreciated.
Pulsating response on brake pedal is normal.
It would feel extreme on the pedal when road surface is wet.
--
Golden-German Shepherd | 2021 XC90 T6 INSCRIPTION (Nexa) | 2020 V60CC (Frska) | 2013A XC90 (Lktra)
Past: Golden Retriever | 2001 V70XC | 1997 Volvo 854 | 1989 Volvo 740 GL | 1979 Volvo 240

jblackburn
MVS Moderator
Posts: 14042
Joined: 08 Jun 2008, 15:54
Year and Model: 1998 S70 T5
Location: Alexandria, VA
Has thanked: 9 times
Been thanked: 20 times

Post by jblackburn »

I would give all of your other sensors and axle reluctance rings a good cleaning - any gunk cleaner and a toothbrush will work.
'98 S70 T5
2016 Chevy Cruze Premier


A learning experience is one of those things that says, "You know that thing you just did? Don't do that."

mercuic: Long live the tractor motor!

cg23cpo
Posts: 5
Joined: 23 Jun 2013, 09:36
Year and Model: 2006 V70
Location: USA

Post by cg23cpo »

I would suspect the reluctor rings on the axles. Mine does the same and my front left is rusted and missing 1 tooth, the right front is rusty with a cracked CV boot.

They are easy to inspect. Just remove the tire, turn the steering to see the back side of the knuckle and you should be able to see the ring on the outboard side of the outer CV joint.

Because I live in the rust belt, I will replace the axle assemblies rather than rebuild to save time and aggravation. NAPA said $75 for each assembly, your price may vary.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post