Hello all,
Noticed a leak today on my 850 Turbo, took some pics and attached them, can you all please tell me which line this is and is it easy to replace? Thanks for any input.
96 850 turbo oil line leaks, need advice
-
neworleans
- Posts: 485
- Joined: 7 April 2009
- Year and Model: 2007 S60R
- Location: new orleans
- jreed
- Posts: 1619
- Joined: 8 March 2009
- Year and Model: '97 Volvo 855 GLT
- Location: RTP, North Carolina
- Has thanked: 352 times
- Been thanked: 192 times
I had a leak in that line too. I replaced both lines with new OEM parts and wrote it up here:
https://www.matthewsvolvosite.com/forums ... 4&p=282557
Others have reported good success and great savings by building up their own lines with hose clamps or getting the crimps redone.
https://www.matthewsvolvosite.com/forums ... 4&p=282557
Others have reported good success and great savings by building up their own lines with hose clamps or getting the crimps redone.
1997 855 GLT (Light Pressure Turbo) still going strong. Previous: 1986 240 GL rusted out in '06, 1985 Saab 900T rusted out in '95, 1975 Saab 99 rusted out in '95, 1973 Saab 99 rusted out in '94
-
cn90
- Posts: 8256
- Joined: 31 March 2010
- Year and Model: 2004 V70 2.5T
- Location: Omaha NE
- Has thanked: 4 times
- Been thanked: 471 times
Rebuilding TRANS Cooler Lines DIY for $10, Engine OIL Cooler line similar:
https://www.matthewsvolvosite.com/forums ... p?p=328187
For Oil Cooler Lines DIY, there are certain tricks/tips, I posted them below (note you need new rectagular seal, new Green O-rings at tstat area, and new O-rings at the cooler area.
Don't forget that the metal clips only fit one way at the cooler! Also use a screw-type clamp to secure the metal clip, otherwise it can become disconnected: all oil will be lost!!!
https://www.matthewsvolvosite.com/forums ... 7&p=311050
https://www.matthewsvolvosite.com/forums ... p?p=328187
For Oil Cooler Lines DIY, there are certain tricks/tips, I posted them below (note you need new rectagular seal, new Green O-rings at tstat area, and new O-rings at the cooler area.
Don't forget that the metal clips only fit one way at the cooler! Also use a screw-type clamp to secure the metal clip, otherwise it can become disconnected: all oil will be lost!!!
https://www.matthewsvolvosite.com/forums ... 7&p=311050
2004 V70 2.5T 100K+
2005 XC90 2.5T 110K+
2005 XC90 2.5T 110K+
-
- Similar Topics
- Replies
- Views
- Last post






