2000 v70 rear suspension

Post by **famfeld** » 07 Oct 2015, 03:55

Sometimes I go a bit overboard replacing parts. SInce I don't have a 'cool car' to soup up and wax and cruise, I tend go over the top with maintenance and repairs. That being said, I am replacing the e-brake cables and noticed that the rear control arms have play on the outer-most mount (where the e-brake cable is attached). Is this adding to a not-tight feel to my rear suspension? The rubber looks a bit cracked and worn, but I've seen worse. Should I leave it alone or will replacing the rear control arms and rear shocks (I already replaced the right one last summer) give me a much nicer ride). The suspension is ok as is, but the ride COULD be better.

Any advice?

Thanks

-Feld

lummert · Post by **lummert** » 07 Oct 2015, 08:25

You may get more replies if this were in the correct forum.

Post by **famfeld** » 07 Oct 2015, 11:59

Sorry.

I reposted in the right forum. I can't figure out how to delete