Start calling repair shops.Gin wrote:What's that,, a million roller fix??!!
Tightened bolts on valve cover then check engine light came on..?
- erikv11
- Posts: 11913
- Joined: 25 Jul 2009, 14:03
- Year and Model: 850, V70, S60R, XC70
- Location: Iowa
- Has thanked: 312 times
- Been thanked: 818 times
Expensive fix, at least $1500 at a good shop. For the people here who do a DIY head gasket job, it ends up being about $600+ to do it right, that's doing all the work yourself except some tasks that are best done by dropping off the head at a machine shop.
'95 854 T-5R, Motronic 4.4, 185k
'98 V70, T5 tune-injectors-turbo, LPT engine, 304k, daily driver
'06 S60 R, 201k
'07 XC70, black, 205k
'07 XC70, willow green, 223k
gone: '96 NA 850 210k, '98 NA V70 182k, '98 S70 NA 225k, '96 855 NA 169k
'98 V70, T5 tune-injectors-turbo, LPT engine, 304k, daily driver
'06 S60 R, 201k
'07 XC70, black, 205k
'07 XC70, willow green, 223k
gone: '96 NA 850 210k, '98 NA V70 182k, '98 S70 NA 225k, '96 855 NA 169k
-
tryingbe
- Posts: 1893
- Joined: 18 Jun 2009, 12:43
- Year and Model: None
- Location: Mesa, AZ, USA
- Has thanked: 1 time
- Been thanked: 26 times
Sooner, rather than later, the engine will overheat and you'll have left on the side of the road.Gin wrote:How bad is it to drive like it is?
85 GLH, 367 whp
00 Insight, 72 mpg
00 Insight, 72 mpg
-
tryingbe
- Posts: 1893
- Joined: 18 Jun 2009, 12:43
- Year and Model: None
- Location: Mesa, AZ, USA
- Has thanked: 1 time
- Been thanked: 26 times
Next time when you buy a used car, take it to a mechanic of your choice to be checked BEFORE buying it. It'll be the best $50-$80 you'll ever spent on a car.
85 GLH, 367 whp
00 Insight, 72 mpg
00 Insight, 72 mpg
- bmdubya1198
- Posts: 6357
- Joined: 30 Dec 2014, 10:45
- Year and Model: 2K V70R M56
- Location: Charlotte, NC
- Has thanked: 316 times
- Been thanked: 531 times
If you plan on fixing it, you better read up and DIY...
Otherwise, sell it as a parts car or to be fixed. Don't bring it to a pull a part or something... it always kills me to see perfectly good repairable cars there.
Otherwise, sell it as a parts car or to be fixed. Don't bring it to a pull a part or something... it always kills me to see perfectly good repairable cars there.
07 XC90 V8 AWD Sport Titanium Grey/Black 235k
92 245 White/Beige 249k
91 944 Turbo 175k
…and a bunch of other stuff
Sold-
00 V70R Venetian Red/Charcoal M56 Swapped
03 S60 2.4T
00 S70 GLT
98 V70 GLT
93 944
98 S90
95 850 GLT
01 S60 2.4T
05 S60R M66
08 S40 2.4i
88 744 Turbo M46
92 245 White/Beige 249k
91 944 Turbo 175k
…and a bunch of other stuff
Sold-
00 V70R Venetian Red/Charcoal M56 Swapped
03 S60 2.4T
00 S70 GLT
98 V70 GLT
93 944
98 S90
95 850 GLT
01 S60 2.4T
05 S60R M66
08 S40 2.4i
88 744 Turbo M46
- abscate
- MVS Moderator
- Posts: 36156
- Joined: 17 Feb 2013, 17:54
- Year and Model: 99: V70s S70s,05 V70
- Location: Port Jefferson Long Island NY
- Has thanked: 1611 times
- Been thanked: 4072 times
I hate these stories. Buddha will seek out these and deal them the cold taste of revenge.
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread
- dosbricks
- Posts: 1116
- Joined: 30 Dec 2004, 18:17
- Year and Model: '96 855, '98 S70
- Location: South Texas
- Been thanked: 4 times
Bummer.
It's disheartening to hear of an innocent buyer being taken advantage of. Purchasing a used car is definitely "Buyer beware."
'98 S70, 230k, purchased new in '98
'96 855 GLT, 163k, purchased lightly used in '99
Onceuponatime RIP '69 Shelby GT500 w/7.0 liter
'96 855 GLT, 163k, purchased lightly used in '99
Onceuponatime RIP '69 Shelby GT500 w/7.0 liter
OK, so its fixed!! Love my dad. Turned out to be a different gasket, compression test tuned out good , all at 170-&180 . so he took it, brought it back fixed. Cost less than $150. Woohoo!!
But, next problem.. Haha.. My floorboard is wet. Been that way since I bought it (12/29/15), but my heater works, no overheating, and I'm not loosing any water.. ?? So I'm a little confused.. Any suggestions?
But, next problem.. Haha.. My floorboard is wet. Been that way since I bought it (12/29/15), but my heater works, no overheating, and I'm not loosing any water.. ?? So I'm a little confused.. Any suggestions?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 2316 Views
-
Last post by oragex
-
- 2 Replies
- 971 Views
-
Last post by fixer333
-
- 1 Replies
- 1135 Views
-
Last post by abscate
-
- 3 Replies
- 1238 Views
-
Last post by precopster
-
- 0 Replies
- 2775 Views
-
Last post by abscate






