06 Xc70 cabin blower motor options Topic is solved

Post by **scot850** » 17 Dec 2016, 13:28

Thanks guys. I think I will replace it anyway. My son uses the car now and I know if I leave it it will fail when I have no time to fix it! Thanks for all the suggestions and inputs.

Neil.

Post by **abscate** » 18 Dec 2016, 05:11

beigg wrote:smear trans assembly lube on the bearing, it bought be 2 years before i replaced it.

If you use leftover CV joint grease you can enjoy the smell of MoS2 in the cabin permanently but you will save at least 2 cents, Canadian.

beigg · Post by **beigg** » 18 Dec 2016, 08:02

abscate wrote:
beigg wrote:smear trans assembly lube on the bearing, it bought be 2 years before i replaced it.
If you use leftover CV joint grease you can enjoy the smell of MoS2 in the cabin permanently but you will save at least 2 cents, Canadian.

lol, minds well go the extra mile and use rearend dope. mmmmmm the smell of rancid feline urine being heated up..

Trans assembly lube is very low odor and is safe for select bimetal use.