Login Register

VOLVO DDM Clicking

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive P2 platform cars sold as model years 2001-2007 (North American market year designations).

2001 - 2007 V70
2001 - 2004 V70 XC (Cross Country)
2004 - 2007 XC70 (Cross Country)
2001 - 2009 S60
2003 - 2007 S60 R
2004 - 2007 V70 R

Post Reply
User avatar
darylrobert
Posts: 423
Joined: 13 July 2010
Year and Model: V70 240 740t xc70
Location: Australia
Has thanked: 6 times
Been thanked: 42 times

VOLVO DDM Clicking

Post by darylrobert »

VOLVO 2001 XC70 sending morse code when i open any of the doors first thing in the morning, anyone know what its saying?.."help i am cold"

Sometimes both mirrors go up but havnt seen that happen lately.

Last edited by darylrobert on 06 Jul 2017, 22:03, edited 3 times in total.

User avatar
darylrobert
Posts: 423
Joined: 13 July 2010
Year and Model: V70 240 740t xc70
Location: Australia
Has thanked: 6 times
Been thanked: 42 times

Post by darylrobert »

Ive swapped out the Drivers Door Module (DDM) relay and replaced it with a known good one, both relays gave me the same result when i tested them on a multimeter, so i dont think its the actual relay thats the problem more likely an ic or something too technical for me anyway i wont find out if my fix worked until the morning. If it doesnt work i will have to buy a new DDM and drive 3 hours to have it programmed.
DDM-relay.jpg
DDM-relay.jpg (2.59 MiB) Viewed 3150 times

User avatar
darylrobert
Posts: 423
Joined: 13 July 2010
Year and Model: V70 240 740t xc70
Location: Australia
Has thanked: 6 times
Been thanked: 42 times

Post by darylrobert »

theres a few posts on different forums about this issue like this one from 2014

http://www.volvoforums.org.uk/showthread.php?t=215658

dont you hate these forums when people dont post their end results :evil:

User avatar
darylrobert
Posts: 423
Joined: 13 July 2010
Year and Model: V70 240 740t xc70
Location: Australia
Has thanked: 6 times
Been thanked: 42 times

Post by darylrobert »

REPAIRED it was this little relay that was faulty, tested great this morning. trick to getting the relay de-soldered is cutting the clear laquer/ sealant from the top whick allows it to be prised off.

User avatar
darylrobert
Posts: 423
Joined: 13 July 2010
Year and Model: V70 240 740t xc70
Location: Australia
Has thanked: 6 times
Been thanked: 42 times

Post by darylrobert »

UPDATE looks like my relay swap is working 99% of the time, i got up at 4am to feed the cat and just tried the passenger door and the DDM started its clicking but only for about 3seconds. I really think this relay is affected by the cold as it was very cold. Ive tried it later in the morning and it works fine. Ive ordered a new relay, hopefully the pc board can handle my soldering and desoldering.

In the meantime my replacement auto dim mirror has arrived so i will hopefully get that working and see if the clicking relay is affecting the mirrors

Post Reply
  • Similar Topics
    Replies
    Views
    Last post