Login Register

pins for fuel door bracket oops!

Post Reply
volvomadness
Posts: 143
Joined: 02 Sep 2009, 18:12
Year and Model: v70 2003
Location: new york
Been thanked: 9 times

Post by volvomadness »

Had the fuel door bracket on a table with the pins. The table was cleaned off and pins are no where in sight. Has anyone found a place or way I can replace them. Home Depot? or other

User avatar
RickHaleParker
Posts: 7195
Joined: 25 May 2015, 14:30
Year and Model: See Signature below.
Location: Kansas
Has thanked: 8 times
Been thanked: 977 times

Post by RickHaleParker »

Unless somebody got real bored, I doubt anybody took the time to locate replacement pins. The fuel door hinge assembly is $6.00 on Ebay. If I was in your shoes and need it done today, I would locate nails the right diameter then cut pins out of the nails.
Active
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )

kcb203
Posts: 7
Joined: 05 Aug 2013, 07:31
Year and Model: 2005 XC70
Location: Virginia

Post by kcb203 »

Can you pull the used pins out of the old bracket? I did that for one of the four when I replaced mine because I was missing one.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post