Login Register

Timing belt questions

Post Reply
mrjay62
Posts: 217
Joined: 14 May 2014, 07:45
Year and Model: V70XC 2002
Location: Plamyar Ny
Been thanked: 3 times

Post by mrjay62 »

Thanks Abscate.
That's way different.
I'm thinking I may have bent that line I can get it close by not close enough to start a bolt or without the heat shield touching the pipe.
Got a back up pipe and more copper washers , orings... going swap them while it stopped raining... grrr

User avatar
RickHaleParker
Posts: 7208
Joined: 25 May 2015, 14:30
Year and Model: See Signature below.
Location: Kansas
Has thanked: 8 times
Been thanked: 980 times

Post by RickHaleParker »

2018-10-15.png
Active
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )

mrjay62
Posts: 217
Joined: 14 May 2014, 07:45
Year and Model: V70XC 2002
Location: Plamyar Ny
Been thanked: 3 times

Post by mrjay62 »

Thanks Rick..
I figured out how it goes back together but the pipe is in the way....
Need batteries its almost out...lol

User avatar
abscate
MVS Moderator
Posts: 36163
Joined: 17 Feb 2013, 17:54
Year and Model: 99: V70s S70s,05 V70
Location: Port Jefferson Long Island NY
Has thanked: 1611 times
Been thanked: 4075 times

Post by abscate »

I think it slips under the pipe.
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread

mrjay62
Posts: 217
Joined: 14 May 2014, 07:45
Year and Model: V70XC 2002
Location: Plamyar Ny
Been thanked: 3 times

Post by mrjay62 »

Yes it does go under the pipe...
But not to name names Some Dumbass some how bent the pipe! Someone with the bright idea to remove the head with the manifold attached!

Grrrr. Pipe replaced and it now fits just as it should....

Thank guys.
DA.

User avatar
BlackBart
Posts: 6728
Joined: 10 Dec 2016, 17:03
Year and Model: 2004 XC70 BlackBetty
Location: Over the far far mountains
Has thanked: 967 times
Been thanked: 923 times

Post by BlackBart »

You're patient and perseverant, Mr DA, and that's all that matters.
ex-1984 245T wagon
1994 850T5 wagon
2004 XC70 wagon BlackBetty

mrjay62
Posts: 217
Joined: 14 May 2014, 07:45
Year and Model: V70XC 2002
Location: Plamyar Ny
Been thanked: 3 times

Post by mrjay62 »

lol thanks...
So far this is where I'm at...
Taken a little break and I'll get back at it....
Attachments
1539716296172-948013774.jpg
1539716378067684711585.jpg

User avatar
BlackBart
Posts: 6728
Joined: 10 Dec 2016, 17:03
Year and Model: 2004 XC70 BlackBetty
Location: Over the far far mountains
Has thanked: 967 times
Been thanked: 923 times

Post by BlackBart »

Did you powder coat that cam cover? It gleams!

Just a question about working outside......it sucks, I understand. Would one of those big square collapsable tent canopy things provide enough cover for you? This amazing guy in Seattle did an entire 122 wagon body swap in his driveway using a folding canopy.
ZZZZZ.jpg
ZZZZZ.jpg (84.75 KiB) Viewed 765 times
ex-1984 245T wagon
1994 850T5 wagon
2004 XC70 wagon BlackBetty

mrjay62
Posts: 217
Joined: 14 May 2014, 07:45
Year and Model: V70XC 2002
Location: Plamyar Ny
Been thanked: 3 times

Post by mrjay62 »

Hey BBart.
No powder coat, bead blast VHT primer and VHT cast aluminum paint....
Its what I do when I can't do anything do anything else. .. BTW
She's Alive so far so good one coolant leak lower line just below the manifold. Letting in cool down and ill get back to it...

I do have have a 2 car garage
..lol one side is full of the new deck furniture. . Aka my side... the other belongs to my PITA... So I'm stuck outside, don't mind the temperature it's the rain ....

mrjay62
Posts: 217
Joined: 14 May 2014, 07:45
Year and Model: V70XC 2002
Location: Plamyar Ny
Been thanked: 3 times

Post by mrjay62 »

Hi guys.
So far she's running sounds good, had one little coolant leak! That's fixed ... Everything else seems fine I let her run for over an hour..
No trouble lights no over heatng and so far Nothing is leaking. Tomorrow I'll take for a test drive.... too late and dark now.....

I did mess up and added the wrong antifreeze to top it off..... Didnt realize until I went back outside to shut off the car.... oh well...
I Been using ZEREX G-05 50/50.... unless someone tells me thats wrong...

Thanks guys

Post Reply
  • Similar Topics
    Replies
    Views
    Last post