IPD sale XeMODeX - Experts in Volvo Electronics
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy your stuff using this and it helps MVS!

fuel abd evap lines needed

Help, Advice and DIY Tutorials on Volvo's extremely popular car line -- Volvo's 1990s "bread and butter" cars -- powered by the ubiquitous and durable Volvo inline 5-cylinder engine.

1992 - 1997 850, 850 R, 850 T5-R, 850 T5, 850 GLT
1997 - 2000 S70, S70 AWD
1997 - 2000 V70, V70 AWD
1997 - 2000 V70-XC
1997 - 2004 C70

User avatar
davidrjurman
Posts: 8
Joined: Mon Apr 24, 2017 7:25 pm
Year and Model: 02 s60, 96 850, 98 v
Location: Connecticut
Has thanked: 5 times
Been thanked: 0
United States of America
davidrjurman

fuel abd evap lines needed

Post by davidrjurman » Tue Nov 20, 2018 11:21 am

Does anyone know where I can get the fuel and evap lines from tank to engine for a 98 V70 AWD
VIN YVILW5642W2416056? New, Good used? :(
Everything is rotten thanks to the crud the state of CT dumps on the road.
I found the driveshaft I needed, and noticed the leak.
DEALER NLA
Don't want to lose the car, and have to pass emissions.
On another note, this is some of the most Fk'd up fuel routing I've ever seen.

Thanks, David



User avatar
abscate
MVS Moderator
Posts: 18171
Joined: Sun Feb 17, 2013 5:54 pm
Year and Model: 99T5 ,99S70,2005V70
Location: NYC, ALBANY NY
Has thanked: 199 times
Been thanked: 647 times
Trinidad & Tobago
abscate

Re: fuel abd evap lines needed

Post by abscate » Wed Nov 21, 2018 2:40 am

You will have to make those up,from hard lines and bend to fit if NLA

Save the last bit of your old ones and just swage new line in

They are very high quality so a junkyard pull would work too.
These users thanked the author abscate for the post:
davidrjurman


Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 BMW

User avatar
davidrjurman
Posts: 8
Joined: Mon Apr 24, 2017 7:25 pm
Year and Model: 02 s60, 96 850, 98 v
Location: Connecticut
Has thanked: 5 times
Been thanked: 0
United States of America
davidrjurman

Re: fuel abd evap lines needed

Post by davidrjurman » Wed Nov 21, 2018 7:28 am

Thanks, I've tried scrapyards, apparently there are a couple differing versions. High quality or not, what ever CT is dumping on the winter ice is killing all my cars. I guess match and bend is the option to go with. 304/316 stainless tube should last forever. Makes me wonder why they dont use it to start off.



User avatar
abscate
MVS Moderator
Posts: 18171
Joined: Sun Feb 17, 2013 5:54 pm
Year and Model: 99T5 ,99S70,2005V70
Location: NYC, ALBANY NY
Has thanked: 199 times
Been thanked: 647 times
Trinidad & Tobago
abscate

Re: fuel abd evap lines needed

Post by abscate » Wed Nov 21, 2018 8:10 am

Even 316 will be killed by road salt - especially the CaCl2 spray stuff. A new piece of 304 or 316 will last decades though.


Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 BMW

Post Reply