Login Register

P0171 - what is this part? Topic is solved

Help, Advice, Owners' Discussion and DIY Tutorials devoted to the second generation C70, S40 and V50 Volvos -- awkwardly model year 2004 ½ onwards -- plus where to go for advice and discussion on Volvo's sporty C30 Coupe powered by Volvo's ubiquitous inline 5-cylinder power plant.
Post Reply
kwality
Posts: 2
Joined: 9 April 2014
Year and Model: 2007 s40 2.4i
Location: United States

P0171 - what is this part?

Post by kwality »

hi all

i have been encountering the P0171 code for the last few years. my car is a 2007 2.4i FWD.

the PCV recall has been done about 3 years ago. recently, i brought the car into volvo and they diagnosed a vacuum leak via a smoke test. the leak was found by the vacuum line attached to the intake manifold.

they were able to clear the code and have been driving fine without a CEL. they advised to replace the whole intake manifold as there was a missing part. Until today, the CEL came back after a spirit drive. i guess it unseated the vacuum line slightly.

i have been looking for this red quick release collar part (indicated in green) but have been unsuccessful. does anyone know what the part number is or name? it connected the brake line vacuum assembly into the intake manifold plenum.

Image

my plan B is to use some high temp silicone.

plan C would be to change the intake manifold.

i have cleaned the MAF, TB and have a KN filter. this has not helped.

thank you in advance.
Last edited by kwality on 14 Jul 2018, 08:13, edited 1 time in total.

User avatar
RickHaleParker
Posts: 7129
Joined: 25 May 2015
Year and Model: See Signature below.
Location: Kansas
Has thanked: 8 times
Been thanked: 958 times

Post by RickHaleParker »

It is the engine end of the Vacuum hose assembly, Volvo part number 31201432. It is sold only as a complete hose assembly.

2018-07-13 (1).png
⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.

kwality
Posts: 2
Joined: 9 April 2014
Year and Model: 2007 s40 2.4i
Location: United States

Post by kwality »

good morning!

thank you for the quick response.

i was able to find the vacuum hose assembly, but not the connector at the end that mates it to the intake manifold. that's the red collar i showed above.

thank you for trying.

KArthur1
Posts: 4
Joined: 23 June 2017
Year and Model: 2010 S40i(non turbo)
Location: SE US

Post by KArthur1 »

I just wrapped mine with self-fusing silicon tape. No more leaks.

Image

Post Reply
  • Similar Topics
    Replies
    Views
    Last post