ATF line I.D. for Magnefine filter?

Mr. Detail · Post by **Mr. Detail** » 05 Jun 2019, 07:23

Since I am not even sure of where the ATF line actually is, can anyone tell me what the I.D. is on my 2002 V70 so I can purchase the correct size filter?
Here is the e-mail response from the "Magnefine" company: "It will either have a 3/8" or 1/2" I.D. You will be able to tell if it is the 1/2" as the OD of the line is extremely large. Most of the Volvo's in that era are the 3/8" but there were some that were the 1/2" so I don't want to guess."

XC70Rider · Post by **XC70Rider** » 05 Jun 2019, 08:17

In late April I defined the size of the Magnefine filter. I found it in a few seconds using the SEARCH function

XC70Rider wrote: 21 Apr 2019, 07:18
The Magnefine 3/8" Magnetic Inline Transmission Filter does have an internal bypass valve. Measuring the ATF temp with VIDA the temp didn't change after I installed this filter last December. I wouldn't of installed the filter if it didn't have the bypass valve.

Watch these video in this post I made for you in your 'Crush Washer' thread. It defines how to install the filter, drain the ATF, shows the location of the ATF drain plug and answers many more questions

XC70Rider wrote: 22 May 2019, 13:59
viewtopic.php?f=9&t=89571

Archer · Post by **Archer** » 05 Jun 2019, 08:26

I have a 2002 V70 T5, installed a Magnefine filter, it was 3/8".

Mr. Detail · Post by **Mr. Detail** » 05 Jun 2019, 09:26

Thanks much gentlemen!