Wastegate flapper

Post by **bmdubya1198** » 13 Sep 2019, 08:13

ecbsykes wrote: ↑12 Sep 2019, 18:34 That's odd. I'd be concerned about that JB Weld inside the housing coming loose and breaking apart after so many heat cycles. Debris like that would not be great to hit spinning turbines and go down the intake into engine.

Agreed. It may work fine temporarily, but it could potentially cause some damage if it comes apart.

Post by **abscate** » 13 Sep 2019, 12:07

That’s on the exhaust side of the turbo isn’t it? That piece is flying out the manifold fast, I think. Will burn up in the cat

Post by **FlyingVolvo** » 13 Sep 2019, 14:28

Yep, you're right. My bad! Still not ideal I'd say though.

greg850r · Post by **greg850r** » 13 Sep 2019, 17:10

ecbsykes wrote: ↑12 Sep 2019, 18:34 That's odd. I'd be concerned about that JB Weld inside the housing coming loose and breaking apart after so many heat cycles. Debris like that would not be great to hit spinning turbines and go down the intake into engine.

I argee.

Jhagins1 · Post by **Jhagins1** » 17 Sep 2019, 04:27

Thanks guys. I will see if I can find a v in a junk yard and take the exhaust housing

Wastegate flapper

Re: Wastegate flapper