Replaced coils and plugs still getting misfires
-
GoLuckydog
- Posts: 10
- Joined: 03 Jul 2015, 10:27
- Year and Model: xc60 2010
- Location: Connecticut
- Has thanked: 1 time
2010 xc60 t6 got multiple misfires and replaced ignition coils and plugs ran fine for a day then theu codes again for misfires on cylinders 3 & 4. The firing order is 153624 is this correct? What else could be the issue?
-
RickHaleParker
- Posts: 7198
- Joined: 25 May 2015, 14:30
- Year and Model: See Signature below.
- Location: Kansas
- Has thanked: 8 times
- Been thanked: 978 times
Misfiring on adjacent cylinders is a symptoms of a head gasket failure between the two cylinders. Do a compression test.
Active
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )
-
- Similar Topics
- Replies
- Views
- Last post