Login Register

wiring help needed

Post Reply
joeyb321
Posts: 5
Joined: 05 Jul 2020, 18:38
Year and Model: 2001 C70
Location: Massachusetts

Post by joeyb321 »

OK LONG STORY SHORT ... transmission went bad pulled the whole motor and tranny out but it back in and i have a brown wire coming out the engine harness where the main red power wire comes out i dont know if it goes to ground or connects the powers source on the starter? the guy who pulled it our dont remember and now i checked it has 10 -12 volts coming before i fry my ECM does anyone know what it is on a 2001 volvo c70 2.3

User avatar
abscate
MVS Moderator
Posts: 36147
Joined: 17 Feb 2013, 17:54
Year and Model: 99: V70s S70s,05 V70
Location: Port Jefferson Long Island NY
Has thanked: 1610 times
Been thanked: 4065 times

Post by abscate »

You should have two grounds attached on the subframe with M6 bolts, there are a couple of grounds near the starter too, that bolt to th engine.

Wiring by color isn’t-t good practice. Brown is “standard “ for ground but who knows what repairs might have been done, and If you found the one auto tech who conserves OEM wire colors on a repair, rejoice.

If the brown wire had a circular lug on it, that s’more evidence it’s a ground, but again, a wire by color strategy can cost you $3000
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread

joeyb321
Posts: 5
Joined: 05 Jul 2020, 18:38
Year and Model: 2001 C70
Location: Massachusetts

Post by joeyb321 »

i read the prints i am good with all electric by trade but my mechanical guys were certain it might be power so the fight begins LOL. but i have bought a manual online 10k pages whats up with that. I am trying to find the harness in the manual and just got eye tired but thanks ever so much for the help i will tackle in the morning.

User avatar
RickHaleParker  
Posts: 7196
Joined: 25 May 2015, 14:30
Year and Model: See Signature below.
Location: Kansas
Has thanked: 8 times
Been thanked: 978 times

Post by RickHaleParker »

Pictures.
Active
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )

User avatar
abscate
MVS Moderator
Posts: 36147
Joined: 17 Feb 2013, 17:54
Year and Model: 99: V70s S70s,05 V70
Location: Port Jefferson Long Island NY
Has thanked: 1610 times
Been thanked: 4065 times

Post by abscate »

Or a 1000 word description

😀

Oil pressure sensor maybe?
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread

joeyb321
Posts: 5
Joined: 05 Jul 2020, 18:38
Year and Model: 2001 C70
Location: Massachusetts

Post by joeyb321 »

abscate wrote: 06 Jul 2020, 02:01 Or a 1000 word description

😀

Oil pressure sensor maybe?
will the oil pressure sensor knock out voltage

joeyb321
Posts: 5
Joined: 05 Jul 2020, 18:38
Year and Model: 2001 C70
Location: Massachusetts

Post by joeyb321 »

Hey guys any of you know if the engine harness of a 2001 c70 is the same for 2.4 and 2.3?

joeyb321
Posts: 5
Joined: 05 Jul 2020, 18:38
Year and Model: 2001 C70
Location: Massachusetts

Post by joeyb321 »

or if there are any other volvos that use the same engine harness i have a c70 2001 HT 2,3

User avatar
2000c70hpt
Posts: 87
Joined: 27 Mar 2020, 09:11
Year and Model: 2000 C70
Location: Florida
Has thanked: 1 time
Been thanked: 8 times

Post by 2000c70hpt »

joeyb321 wrote: 25 Jul 2020, 16:17 Hey guys any of you know if the engine harness of a 2001 c70 is the same for 2.4 and 2.3?
Yes it is. Ecm is different.
2000 C70 hpt with 140k
2008 xc90 t6 non turbo with 170k

Post Reply
  • Similar Topics
    Replies
    Views
    Last post