Radiator cooler o-ring 988840

skloon · Post by **skloon** » 16 Jun 2021, 12:27

the upper line on my 98 v70 is pouring out fluid- the dealer wont have an o-ring for a week or more- anybody have the size of it so I can just buy one

Post by **volvolugnut** » 16 Jun 2021, 12:58

Is this the trans cooler or what connection?
volvolugnut

skloon · Post by **skloon** » 16 Jun 2021, 13:01

Trans cooler to radiator

Post by **scot850** » 16 Jun 2021, 13:56

I would love to help and there is a chance I might even find one for you, but like you I have no idea what size they are. Do you have the single or double 'O' ring type? I know I have engine oil cooler pipes in the garage and I believe they are the same size. I think those are the 2 ring type but subject to confirmation. Been a long time since I had 98 P80.

Neil.

Post by **volvolugnut** » 16 Jun 2021, 15:39

Would this be the same as P2? Does anyone know? If same as P2, I think I can get measured.
volvolugnut

Post by **scot850** » 16 Jun 2021, 16:53

If I recall a 98 uses a different set up to 99 and on. Hence my request for clarification. I know I can find a part number but that unfortunately does not give the 'O' -ring specs.

Neil.

Post by **abscate** » 17 Jun 2021, 03:33

Try the master oring size thread in this forum

viewtopic.php?f=1&t=88579

988840

It’s showing as 15.5 mm x 2 mm there

Hmmmm…skandix has a different size.

Post by **abscate** » 17 Jun 2021, 03:53

Ah, measured in the ACsystem, on right , mid page

Measurements are OD and thickness