V70 cluster power wires

Khyren · Post by **Khyren** » 04 Mar 2022, 23:07

I have a V70R cluster to go with my engine swap. Before I go through the process of pulling the dash pad, anyone know what two pins will power the cluster so that I can see what the mileage is on the cluster?

Post by **erikv11** » 04 Mar 2022, 23:56

Go to the dash and look at the connector on top of the cluster. It's I think the second and third wires in from the right side edge,
back (nearest the engine) row of wires. the positive is Red/Black and the ground is Black. So if you can ID those two wires, it's the pins that match to them.

Post by **misha** » 05 Mar 2022, 01:50

Post by **abscate** » 05 Mar 2022, 02:06

Ooof, this is for a 1999, but you might s EE the same power in, the hard part will be finding the grounds

1999 cdm electrical diagram

Khyren · Post by **Khyren** » 05 Mar 2022, 09:11

Misha and abscate, you are much appreciated!

Post by **abscate** » 05 Mar 2022, 19:01

I actually found a 1998 CDM in my stash. Now I need to power it up

Watch out , terminal A1 ejects the warp core….