Greetings everyone!
I am in the midst of changing the timing belt on my V70 and am unsure of the cam sprocket marks and alignment with the marks on the cover.
I have the marks on the crank pulley lined up but only one of the cam sprockets is aligned. The exhaust cam sprocket is off by a tooth, this after 4 maybe 5 revolutions of the crank pulley.
What should I do next so all the marks line up?
Appreciate your suggestions!
Timing belt change
-
5rivers
- Posts: 533
- Joined: 27 February 2009
- Year and Model: V70 1998 T5
- Location: The North Country, NYS
- Been thanked: 14 times
Timing belt change
5rivers
1998 V70 M56, silver/grey, has tranny issues, #?# owner, 330,xxx miles, a handy parts car
1998 V70 AT, nautical blue, 2nd owner, 260,000 miles, Sold
1998 V70 AT, T5, forest green, 3rd owner, 172,300 miles, Mimas 16" rims
1998 V70 M56, silver/grey, has tranny issues, #?# owner, 330,xxx miles, a handy parts car
1998 V70 AT, nautical blue, 2nd owner, 260,000 miles, Sold
1998 V70 AT, T5, forest green, 3rd owner, 172,300 miles, Mimas 16" rims
-
abscate
- MVS Moderator
- Posts: 35316
- Joined: 17 February 2013
- Year and Model: 99: V70s S70s,05 V70
- Location: Port Jefferson Long Island NY
- Has thanked: 1507 times
- Been thanked: 3823 times
Slip the belt off and move the pulley to align it with the marks on the cover. You can do this without disturbing the other belt path if you are careful
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread
-
5rivers
- Posts: 533
- Joined: 27 February 2009
- Year and Model: V70 1998 T5
- Location: The North Country, NYS
- Been thanked: 14 times
- 9D75F4AC-A035-4A4A-B333-B43DDB8E4705.jpeg (475.52 KiB) Viewed 439 times
- 36ACD0F8-6DCE-4F01-B51A-E2FF98ACCDA0.jpeg (587.88 KiB) Viewed 439 times
Bottom pic is the exhaust cam - off by a tooth.
These are the positions when the crank pulley is aligned properly.
5rivers
1998 V70 M56, silver/grey, has tranny issues, #?# owner, 330,xxx miles, a handy parts car
1998 V70 AT, nautical blue, 2nd owner, 260,000 miles, Sold
1998 V70 AT, T5, forest green, 3rd owner, 172,300 miles, Mimas 16" rims
1998 V70 M56, silver/grey, has tranny issues, #?# owner, 330,xxx miles, a handy parts car
1998 V70 AT, nautical blue, 2nd owner, 260,000 miles, Sold
1998 V70 AT, T5, forest green, 3rd owner, 172,300 miles, Mimas 16" rims
-
5rivers
- Posts: 533
- Joined: 27 February 2009
- Year and Model: V70 1998 T5
- Location: The North Country, NYS
- Been thanked: 14 times
When looking at the intake cam sprocket, it looks like the bolts were not lined where they were initially. Should I take the belt off and adjust that sprocket?
5rivers
1998 V70 M56, silver/grey, has tranny issues, #?# owner, 330,xxx miles, a handy parts car
1998 V70 AT, nautical blue, 2nd owner, 260,000 miles, Sold
1998 V70 AT, T5, forest green, 3rd owner, 172,300 miles, Mimas 16" rims
1998 V70 M56, silver/grey, has tranny issues, #?# owner, 330,xxx miles, a handy parts car
1998 V70 AT, nautical blue, 2nd owner, 260,000 miles, Sold
1998 V70 AT, T5, forest green, 3rd owner, 172,300 miles, Mimas 16" rims
-
5rivers
- Posts: 533
- Joined: 27 February 2009
- Year and Model: V70 1998 T5
- Location: The North Country, NYS
- Been thanked: 14 times
If I adjust the exhaust cam sprocket then the intake and crank pulley will remain aligned, correct?
5rivers
1998 V70 M56, silver/grey, has tranny issues, #?# owner, 330,xxx miles, a handy parts car
1998 V70 AT, nautical blue, 2nd owner, 260,000 miles, Sold
1998 V70 AT, T5, forest green, 3rd owner, 172,300 miles, Mimas 16" rims
1998 V70 M56, silver/grey, has tranny issues, #?# owner, 330,xxx miles, a handy parts car
1998 V70 AT, nautical blue, 2nd owner, 260,000 miles, Sold
1998 V70 AT, T5, forest green, 3rd owner, 172,300 miles, Mimas 16" rims
-
5rivers
- Posts: 533
- Joined: 27 February 2009
- Year and Model: V70 1998 T5
- Location: The North Country, NYS
- Been thanked: 14 times
HELP!!
5rivers
1998 V70 M56, silver/grey, has tranny issues, #?# owner, 330,xxx miles, a handy parts car
1998 V70 AT, nautical blue, 2nd owner, 260,000 miles, Sold
1998 V70 AT, T5, forest green, 3rd owner, 172,300 miles, Mimas 16" rims
1998 V70 M56, silver/grey, has tranny issues, #?# owner, 330,xxx miles, a handy parts car
1998 V70 AT, nautical blue, 2nd owner, 260,000 miles, Sold
1998 V70 AT, T5, forest green, 3rd owner, 172,300 miles, Mimas 16" rims
-
Sveedy
- Posts: 2069
- Joined: 11 November 2019
- Year and Model: 96 850 Turbo
- Location: N. Arizona
- Has thanked: 417 times
- Been thanked: 457 times
Yes. As abscate stated, you can slip the belt off, turn the exhaust sprocket one tooth, and reinstall the belt.
Try to learn life's bad lessons vicariously through others.
1996 850 Turbo GLH ( Goes Like Hell )
1999 V70 GLT
1996 850 Turbo GLH ( Goes Like Hell )
1999 V70 GLT
-
abscate
- MVS Moderator
- Posts: 35316
- Joined: 17 February 2013
- Year and Model: 99: V70s S70s,05 V70
- Location: Port Jefferson Long Island NY
- Has thanked: 1507 times
- Been thanked: 3823 times
I use a zip tie to hold the belt on the sprocket in place while I slip the belt off the other , then move it a notch.
Don’t forget to remove zip tie then turn engine through two crank revolutions and recheck timing marks.
Don’t forget to remove zip tie then turn engine through two crank revolutions and recheck timing marks.
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread
-
5rivers
- Posts: 533
- Joined: 27 February 2009
- Year and Model: V70 1998 T5
- Location: The North Country, NYS
- Been thanked: 14 times
Ok, thanks! Will try that 
5rivers
1998 V70 M56, silver/grey, has tranny issues, #?# owner, 330,xxx miles, a handy parts car
1998 V70 AT, nautical blue, 2nd owner, 260,000 miles, Sold
1998 V70 AT, T5, forest green, 3rd owner, 172,300 miles, Mimas 16" rims
1998 V70 M56, silver/grey, has tranny issues, #?# owner, 330,xxx miles, a handy parts car
1998 V70 AT, nautical blue, 2nd owner, 260,000 miles, Sold
1998 V70 AT, T5, forest green, 3rd owner, 172,300 miles, Mimas 16" rims
-
rrres
- Posts: 114
- Joined: 24 March 2022
- Year and Model: 1999 v70XC
- Location: So CA
- Has thanked: 10 times
- Been thanked: 26 times
I don't know the solution but it does look like, as you've mentioned, that the intake (sprocket?) is the one that is off. I don't think you necessarily need the locking tool, but it might be worth it to look at the rear of the cams to make sure the notches are properly aligned before you install the belt. It might turn out that the intake sprocket is off.
By the way, double check the crank sprocket notch marks, which aren't precise. Check it against the embossed mark on the crank sprocket.
By the way, double check the crank sprocket notch marks, which aren't precise. Check it against the embossed mark on the crank sprocket.
It's blowby
-
- Similar Topics
- Replies
- Views
- Last post