What did you do to your P2 Volvo today?

[BlackBart]

This is the 850 with Lanoguard applied
Dry1.jpg

Do you mask off the exhaust then?

[P80GLT]

The exhaust is the original that the car left the factory with (now almost 27 years old) I painted it with high temperature paint in 2021 and when I was applying the Lanoguard I held cardboard up to prevent it getting covered in the liquid

[P80GLT]

That’s the front end cleaned ready for Lanoguard. I was surprised at how little muck there was at the top of the strut towers and once cleaned I was pleasantly surprised at the lack of rust up there as it’s a known weak spot on the P2 V70s

17.jpeg (227.97 KiB) Viewed 705 times

18.jpeg (187.38 KiB) Viewed 705 times

19.jpeg (165.07 KiB) Viewed 705 times

20.jpeg (244.33 KiB) Viewed 705 times

22.jpeg (231.98 KiB) Viewed 705 times

23.jpeg (239.54 KiB) Viewed 705 times

24.jpeg (190.47 KiB) Viewed 705 times

25.jpeg (186.58 KiB) Viewed 705 times

26.jpeg (171.1 KiB) Viewed 705 times

27.jpeg (209.67 KiB) Viewed 705 times

[P80GLT]

Removed the back wheels today to get better access and managed to find a load more muck from inside some of the suspension arms.

31.jpeg (395.67 KiB) Viewed 675 times

Most of the muck was in this part, quietly sitting waiting for the next downpour so that it could rust a little more. A good douse in Lanoguard will sort it out

32.jpeg (142.13 KiB) Viewed 675 times

There was also quite a bit of muck in this arm but it looks to be a non ferrous metal so not as much of a concern

33.jpeg (148.87 KiB) Viewed 675 times

Bump stop plates were a little ragged round the outer edges

34.jpg (229.96 KiB) Viewed 675 times

Good time to check behind them for rust

35.jpg (153.23 KiB) Viewed 675 times

Painted and refitted, wheel arch liners de-tarred and will apply some Chemical Guys Bare Bones once the Lanoguard has been applied

36.jpg (237.52 KiB) Viewed 675 times

[BlackBart]

I hang out with the right sort of people at my hardware store.....

22754E73-F0C1-4C9F-ABC3-6AD2C27F4848.jpeg (806.51 KiB) Viewed 659 times

[TisMe]

I hang out with the right sort of people at my hardware store.....


22754E73-F0C1-4C9F-ABC3-6AD2C27F4848.jpeg

Sure Bart but that’s a P3

[vtl]

I hang out with the right sort of people at my hardware store.....


22754E73-F0C1-4C9F-ABC3-6AD2C27F4848.jpeg

Sure Bart but that’s a P3

That Ford Edge in far spot is also technically a Ford's version of XC60. Or, perhaps, the other way around.

One of the three cars on that picture does not have subframe rust

[BlackBart]

Mine....?

Volvo wagons - they’re my people!

[P80GLT]

Lanoguard completed today and just need to let it dry overnight

38.jpeg (279.27 KiB) Viewed 588 times

39.jpeg (274.21 KiB) Viewed 588 times

[jonesg]

got my car inspected this morning, now I have 12 more months to fix the exhaust.

in the uk it would have gone to the crusher before now.