I am relatively new to vida and dice, but i do have a pretty extensive tech background. i recently got a VXDIAG NANO NX300 and it does have the j2534 capabilities.
i have a set up with win10 after the vm gave me some issues and this has gone smoother.
I am still having an issue which im assuming is either something genuinely wrong with my car or with my vxdiag tool.
when i check what car modules are connected it only will show the ECM and every other module is red and says no response.
i am able to view engine parameters with the ecm, but nothing else gives the serial number or part number and when i sent a reset command to the CEM it stalled my car. (the car stalling is part of the issue that im trying to fix.)
has anyone else ever experienced this? if so what fixed it?
here is a link to what im seeing: https://photos.app.goo.gl/ksQcBwjkUwRKPtnK9
the car has been having issues and idles pretty low as well, but i have another thread of the issues with the car itself, its a 2008 xc70.
if anyone has any ideas please let me know, and i appreciate all of you!
