Login Register

Leak between Throttle Body and Air Intake Hose: Best Fix? 2001 S80 2.9 Non-Turbo

Post Reply
DanSC
Posts: 44
Joined: 22 Aug 2011, 08:32
Year and Model: 2001 S80 2.9
Location: California
Been thanked: 1 time

Post by DanSC »

My 2001 S80 2.9L (without a turbo) was not running well, so I decided to smoke-test the intake. I removed the Engine Air Intake Hose (Part Number: 9161391) from the mass airflow sensor at the point 1 in the attached image, in the black box, then put the smoke machine output in that same hose.

Smoke started to leak at the junction between the other end of the hose (red box 2 in the image) and the throttle body. I confirmed that the hose clamp was tight, and then I removed and replaced the hose from the throttle body. This only moved the leak to a different part of the hose-throttle body junction.

Is the fix for this leak a new hose or something else? The car did not have an o-ring at this junction when I purchased it, and I have never seen an o-ring at this junction on any parts diagram or any instructions for servicing either the hose or the throttle body.
Attachments
Volvo Hose.png
Volvo Hose.png (81.67 KiB) Viewed 6694 times

xHeart
Posts: 3321
Joined: 03 Dec 2011, 08:05
Year and Model: 2.0/3.2
Location: Great Lakes - USA
Has thanked: 116 times
Been thanked: 119 times

Post by xHeart »

It is best to replace air intake hose, I have. It becomes brittle with age and cracks.
--
Golden-German Shepherd | 2021 XC90 T6 INSCRIPTION (Nexa) | 2020 V60CC (Frska) | 2013A XC90 (Lktra)
Past: Golden Retriever | 2001 V70XC | 1997 Volvo 854 | 1989 Volvo 740 GL | 1979 Volvo 240

DanSC
Posts: 44
Joined: 22 Aug 2011, 08:32
Year and Model: 2001 S80 2.9
Location: California
Been thanked: 1 time

Post by DanSC »

Thank you. I have ordered a new hose, with the idea that any used hose will eventually have the same issue. It is, of course, one of those parts that must be special ordered, and I do not have access to "Overnight parts from Sweden" :(

I will report back once the new hose eventually arrives.

DanSC
Posts: 44
Joined: 22 Aug 2011, 08:32
Year and Model: 2001 S80 2.9
Location: California
Been thanked: 1 time

Post by DanSC »

The new fresh air intake pipe arrived. It did not fix the air leak.

I cannot feel any cracks or imperfections in the throttle body opening, and I would quite like to try other things before replacing what appears to be a perfectly fine throttle body.

Does anyone have any ideas for sealing this connection? Preferably not something like foam tape that would fall apart and enter the engine...

User avatar
abscate
MVS Moderator
Posts: 36147
Joined: 17 Feb 2013, 17:54
Year and Model: 99: V70s S70s,05 V70
Location: Port Jefferson Long Island NY
Has thanked: 1610 times
Been thanked: 4065 times

Post by abscate »

Maybe the gasket on the throttle body has gone? I don’t think we have ever recorded a throttle body cracking, here
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread

pranayama
Posts: 6
Joined: 01 Sep 2025, 13:34
Year and Model: 2000s80
Location: Vancouver
Has thanked: 1 time

Post by pranayama »

Was not running well .... Like what was the symptom. One may have to find other hose to send the smoke as this one is plastic and not rubber.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post