scot850 wrote: 08 Jul 2026, 20:31 No harm trying! You can also add the front stiffening bars from a C70 that bolt to the front subframe bolts and also further back where the AWD has a crossmember under the prop-shaft to support the center bearing.
The also have a 2nd one that fits inside the front sub-frame, but some modification is needed to add that.
Neil.
Can you remember the part nr or have a picture of the crossmember on the back? I can’t find it on the parts diagram.
Thanks in advance.
Edit: is it this part? Does that add rigidity?







