Login Register

1998 v70...heater blend doors put heat only on dash

Post Reply
User avatar
BEJinFbk
Posts: 4070
Joined: 05 Jan 2008, 22:32
Year and Model: '98 V70 R
Location: Fairbanks, Alaska
Has thanked: 94 times
Been thanked: 146 times

Post by BEJinFbk »

wizechatmgr wrote: 08 Nov 2023, 09:13 Is any other scan tool currently able to interface with the car? That would be my first question.
This. If a cheap stand alone ODB reader works,
then it’s most likely not a car side problem.
'98 V70 R - Well Equipped for Life Up North... ;)

astroman77
Posts: 8
Joined: 16 Nov 2019, 11:09
Year and Model: 1998 v70
Location: TN
Has thanked: 5 times

Post by astroman77 »

V50M66 wrote: 16 Nov 2023, 11:22 I also use an ELM 327 el cheapo BT dongle for my '98.

It's worth reading through my climate nightmare thread here:
viewtopic.php?t=102381
There's a ton of good info and diagnostic aid in that thread when I went through everything in my car to fix my own driver blend door woes.
I just read thru that thread - ouch! time for a couple tylenols LOL. I am not sure how motiviated I am to do this... One thing I have noticed a few times on my car is the flashing lights on the AC buttons. In the past I would just turn off the system, then turn back on and it seemed to start working again. Anyways, thx for sharing the thread...maybe I will get motivated over the winter to work on this...

User avatar
V50M66
Posts: 289
Joined: 21 May 2023, 11:05
Year and Model: 1998 V70 AWD
Location: New England
Has thanked: 26 times
Been thanked: 94 times

Post by V50M66 »

astroman77 wrote: 16 Nov 2023, 14:23
V50M66 wrote: 16 Nov 2023, 11:22 I also use an ELM 327 el cheapo BT dongle for my '98.

It's worth reading through my climate nightmare thread here:
viewtopic.php?t=102381
There's a ton of good info and diagnostic aid in that thread when I went through everything in my car to fix my own driver blend door woes.
I just read thru that thread - ouch! time for a couple tylenols LOL. I am not sure how motiviated I am to do this... One thing I have noticed a few times on my car is the flashing lights on the AC buttons. In the past I would just turn off the system, then turn back on and it seemed to start working again. Anyways, thx for sharing the thread...maybe I will get motivated over the winter to work on this...
Yeah, not fun. You kinda get used to it after replacing that motor 20 times lol

Feel free to message me if you need help and/or parts
1998 V70 AWD - Emerald Green/Tan - M56/Delta link swap, VAST tuned, lots of fun
1998 V70 NA - Nautic Blue/Charcoal - Factory M56/slicktop track car
2006 XC70 Ocean Race - workhorse
1999 Saab 9-3 - daily

2004 XC70 - former workhorse, parted
2005 V50 T5 M66 FWD - former garage queen, sold
2002 S40 1.9T - former daily, rear ended

surfbug1
Posts: 195
Joined: 13 Sep 2006, 13:48
Year and Model: 1998 V70, 2006 S80
Location: Tysons Corner VA
Has thanked: 41 times
Been thanked: 9 times

Post by surfbug1 »

V50M66 wrote: 16 Nov 2023, 15:30
astroman77 wrote: 16 Nov 2023, 14:23
V50M66 wrote: 16 Nov 2023, 11:22 I also use an ELM 327 el cheapo BT dongle for my '98.

It's worth reading through my climate nightmare thread here:
viewtopic.php?t=102381
There's a ton of good info and diagnostic aid in that thread when I went through everything in my car to fix my own driver blend door woes.
I just read thru that thread - ouch! time for a couple tylenols LOL. I am not sure how motiviated I am to do this... One thing I have noticed a few times on my car is the flashing lights on the AC buttons. In the past I would just turn off the system, then turn back on and it seemed to start working again. Anyways, thx for sharing the thread...maybe I will get motivated over the winter to work on this...
Yeah, not fun. You kinda get used to it after replacing that motor 20 times lol

Feel free to message me if you need help and/or parts

yeah man!

I'm gonna test the odb 2 port today, some guys at work have code readers. I may message ya V50M66...for some guidance. Looks like u lived thru this mess

neil up in Canada has been helping , and I unplugged the connections under the handbrake and sprayed them in with contact cleaner , and let them dry for a day or so, then plugged them back in

I'm going to see if I can get a code reader to work, later today, and will report back!

interesting thing these HVAC systems in this car! hahaha load of fun

Al
Got a C3 Corvette corvette for sale? 1968 to 1981...not the 1982 crossfire injection

Ping me!

:D

Post Reply
  • Similar Topics
    Replies
    Views
    Last post