trying to tighten alternator belt on 1992 940 turbo
-
billofdurham
- MVS Moderator
- Posts: 6507
- Joined: 2 February 2006
- Year and Model: 855, 1995
- Location: Durham, England
- Been thanked: 5 times
Welcome to Matthew's Volvo Site.
Using the diagram in the attached slacken, but don't remove, nuts #6 and #9. Adjustment is done by turning the screw in the tensioning arm #7. The belt should be tightened so that with moderate thumb pressure on the longest run of the belt it deflects about 1/4".
Tighten nuts #6 and #9.
Bill.
Using the diagram in the attached slacken, but don't remove, nuts #6 and #9. Adjustment is done by turning the screw in the tensioning arm #7. The belt should be tightened so that with moderate thumb pressure on the longest run of the belt it deflects about 1/4".
Tighten nuts #6 and #9.
940 Alternator tightening.pdf- (1.22 MiB) Downloaded 520 times
Work was good - retirement is better.
1996 850GLT 2.5 20v Estate Manual.
1995 Peugeot Boxer 2.5Tdi Autosleeper.
Previously:
1984 244DL, Manual, Beige.
1987 744GLE, Manual, Green.
1991 960 3.0 24v, Auto, Silver.
1994 940T Wentworth, Auto, Blue.
1996 850GLT 2.5 20v Estate Manual.
1995 Peugeot Boxer 2.5Tdi Autosleeper.
Previously:
1984 244DL, Manual, Beige.
1987 744GLE, Manual, Green.
1991 960 3.0 24v, Auto, Silver.
1994 940T Wentworth, Auto, Blue.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 483 Views
-
Last post by cudatodd43
-
- 16 Replies
- 2710 Views
-
Last post by mydamnvolvo