He's already look like a professional...

Well I'm a bit embarrassed to admit it, since I probably should have tried it when I was first having issues with the lock, but graphite lube for the win! From the first spray the problem mostly disappeared, a little twisting of the key and now it's completely solved. Thank you!

Then one year they went to Pikes Peak! There's no messing around on Pikes Peak.

Don't Go Off

Thanks, foggy and scot, I talked to a very friendly rep at ipd after exhausting options. I like their loaded struts- has all the good, proprietary bits and saves a LOT of hassle. I have spring compressors, but meh. The rep assured me they weren't like 2+ months out; I should have them end of month. ...

I have shelves and shelves of stuff. What I am trying to do (not well!) is starting to give stuff to local owners of the older P80 cars. I help out a few local owners with advice and help as well as wrenching for a couple of folks (don't charge them as money is tight for them). It is my way of givin...

Here, some informations.

Manov

I've done a few of my cars by aggresively sanding down with wet sandpaper (best to remove headlights), 400, 600 and 800 grit. Didn't go too fine as I wanted to leave something for clear coat to stick to. Test your sanding by putting water on it to see if you've missed spots. Then I used a two part a...

Post or pm your VIN to me and I can look it up in VIDA for you. Sent you a PM.. thank you so much! VIDA screenshot below. Chassis are the last six digits of your VIN. So that leads me to think your part number is 30658146 . You could verify with a dealership parts counter if you want, I've done it ...

Update 2007 S60 2.5T with 115K miles ... - Quick Struts no longer available. - No problem, back to basic. - P.O. had a local shop installed Chinese struts (Autozone BS) at 90K. About 20K miles later, they are kaput. S60-Strut-01.jpg - Not only that, the shop installed a spring seat wrong: * On the L...

Question: Once you cut the 2 halves open, how do you put it back together? Silicone caulking??? * You'll have to use a rubber band to hold it till it dries. I am using a little light sprinkle of baking powder on the seam then super glue. https://www.youtube.com/watch?v=Sq5YJbZXaZk https://www.youtu...