https://www.rockauto.com/en/moreinfo.ph ... 20&jsn=399

This is fits my 96 NA

I just got mine delivered this morning.

I decided to paint the intake! Good enough I think.

After a long search, i got an brand new Turbo.

For better fault chasing i'll keep my other thread updated.

viewtopic.php?p=656438#p656438

SOLD

Here's a little picture to illustrate the troubles I've had on this repair:

Here's some pics of that spacer I'd be wanting to post, and also how the spacer mounts up and is oriented. It turns the regular strut for FWD vehicles 180 degrees backwards from normal. If you look at it all - it all eventually makes sense how it has to go back in. (yes, notice how 'rust free' my AW...

Thankfully it died right in front of my house after a spirited short drive. Lo and behold, popped the hood and this is what I found. Ordered a new crankshaft nut and once installed, everything was good to go. Said a little prayer, cause I think I dogged a giant bullet. IMG_4458.jpeg IMG_4449.jpeg IM...

I live close to Hamburg, Germany and have never heard of "Hamburg-Technic" before. They seem to be mostly/only sold in the US, so most likely they are not from Germany and it's just marketing :/

U. have three P2 cars at about 200k. For heater cores I'm waiting for mine to show signs of failure. 06 S60R - This winter the heater was not as strong and on the coldest days it wasn't really sufficient. Presumably the core internals were somewhat/somehow clogged up from 190k miles and 20 years of ...

Everything is in mock up stage. I'll update with a couple new pics of the exhaust completed with the hangers installed and how it sits in the tunnel before everything is sent off to cerakote, when I'm back in the shop this weekend.