Search found more than 1496 matches
- 05 Jul 2015, 22:15
- Jump to forum
- Jump to topic
95 850 M56 manual transmission Swap Write Up
This is a write up for replacing the AW50-40 slush box in an 850 with an M56 manual transmission. Most of the necessary information is already out there on various Volvo forums but another addition won't hurt. I won't go into detail on every step but I'll try to add useful tips for what I found to b...
- 29 Sep 2015, 17:58
- Jump to forum
- Jump to topic
Re: 95 850T Hack to remove a stuck fuel pump locking ring
Nice. This is the kind of ingenuity that sets the mechanics apart from the parts changers at the dealer. Thanks for posting.
- 16 Nov 2015, 22:14
- Jump to forum
- Jump to topic
DIY 2005 XC90 2.5T Rear Brake (Parking Brake) 31262874 Overhaul
DIY 2005 XC90 2.5T REAR BRAKE (PARKING BRAKE) OVERHAUL 2005 XC90 with 95K miles. Symptoms: squeaky rear brake during stop, also RR rotor lost a chunk of metal (see photos). If you have done Parking Brake shoes before, this is similar to other Volvos. I wrote a DIY Parking Brake for 1998 S70 previou...
- 18 Dec 2015, 21:34
- Jump to forum
- Jump to topic
Rebuilt Calipers - Pins, What's the issue? 30648017
1998 S70 T-5 240k miles Just bought some rebuilt front calipers for this car. It has the originals. I read somewhere about the caliper slider pins on the rebuilts not being as quality as the original Volvo pins (Volvo #30648017). I see one of these pins, Volvo OEM, costs around $25.00. That's pretty...
- 19 Dec 2015, 00:02
- Jump to forum
- Jump to topic
Re: Rebuilt Calipers - Pins, What's the issue?
Actually, if you search google using bmw 34110 41349, you will see this ATE part used in many European vehicles.
It cross-references to FTE pins, which are $14.49 for a pair, or $7.25/each:
http://www.eeuroparts.com/Parts/59268/D ... 000K10005/
It cross-references to FTE pins, which are $14.49 for a pair, or $7.25/each:
http://www.eeuroparts.com/Parts/59268/D ... 000K10005/
- 07 Feb 2016, 14:45
- Jump to forum
- Jump to topic
Re: 1999 V70 T5...Abscate no start in Oneonta NY - *now home safe)
Glad you found the problem. When you take your next crack at the failing wire in the hinge harness, you might try replacing it with something more flexible. I've upgraded a number of sections of "moving" wire with arctic grade jacketed wire with a high strand count of copper. Here's are li...
- 22 Feb 2016, 16:19
- Jump to forum
- Jump to topic
Re: Re: 98 S70, N/A, P0116 and P0117... car will not start, again
It could picked up a lawnmower syndrom because of failed ect.
Too much fuel in cylinders from cranking the engine with a bad ect.
Too much fuel in cylinders from cranking the engine with a bad ect.
- 29 Mar 2016, 20:09
- Jump to forum
- Jump to topic
Re: Ok, Im really a cheapskate.... (oil use question)
Scots were branded as cheap by the English. When I went to work in England I told them I was sent as a missionary to teach the English to buy a round of drinks and not just their own!
Neil.
Neil.
- 26 Apr 2016, 06:57
- Jump to forum
- Jump to topic
trunk won't open
The hydraulic on the driver side broke and is still hanging there now it is hanging the trino so that it won't open I need a fix I have 100 dollars of groceries in there
- 02 Jul 2016, 16:10
- Jump to forum
- Jump to topic
Removing seats and redoing front upholstery on a 98 V70
Hey everyone, so I watched Robert's vid on seat removal and putting new seat skins on a front bucket seat. Here is my question; I took a seat skin off of a 2000 S70 with what I assume was an electronic air bag actuator. I now want to pull the seat of my 98 V70 which has the mechanical actuator (with...






