I took a vanity shot just prior to crossing the 300K border, turned out kinda cool :) (this is more current, and not as cool). I’ll see if I can find it. Oh, are you getting the “NO OIL PSI, STOP IMMEDIATELY” message in the DIM or the red oil psi light? If the former, I would heed all notions & ...

As a guy raised on a farm, it occurs to me as ironic that many lawns are heavily fertilized, weeds are controlled, plenty of water is applied, and the perfect grass that is grown is cut and thrown in the trash.
volvolugnut

abscate wrote: ↑14 Apr 2022, 07:57 Mecheng just had an 850 wrecked after a bad incident. Maybe reach out to see if it’s a salvage opportunity

Mechemg is in GTA

I left a message on his thread, thanks for the heads up man!

Today's photos: Going to the dogs.
volvolugnut

matthew1 wrote: ↑21 Apr 2022, 14:07 ... Italy still... set 2/3

Nice trip!

Just adding my 2 cents. RackDoctor is not friendly. I called him and simply asked him if he offered a particular service (just wanted the pinion seal done), and he started foaming out the mouth swearing at me. And I was being a stereotypical polite Canadian about things. I had heard horror stories a...

abscate wrote: ↑24 Apr 2022, 08:49I drove everyone out with bad puns

And that's the reason the rest of us stayed.

I just did a quick math what it costs me for quality parts (preferably made in Germany or good Euro countries etc., no Chinese stuff). It is $338 each side , not including installation cost (forgot to factor in the cross nut #9 when I did this photo; $10/each). If FCP were to do this service (assemb...

Just a quick update on the Gates Fuel Hose I did above for the vacuum line. A few hundred miles later, it works fine, zero issues...

Dash all done and reinstalled. Went really smoothly, but I did have issues with, of all things, the glove box liner. Dumb dumb idea to have the wire loop for the latch behind the lip of the liner. You have to put undo stress on the dash either pulling the liner out or putting it in. Could have been ...