after trying a number of things I gave up and took it to the dealer. According to the dealer need to replace the whole unit with the motor, tracking unit etc at a cost of about $600 and therefore decided to do nothing.

Pulled the glass all the way up and disconnected the motor.

I have removed the inner door panel and can see the track holding the glass. Need advice on the following: 1. Do I need to remove the panel holding the motor etc.? 2. Is it likely to just be alignment or will it need replacement of parts? I use the car for work and therefore need to make sure that I...

v850,

Did your window problem get solved by replacing the trim? I have exactly the same problem and wanted to get some guidance from you.

95' 850 GLT Wagon

Where is the low pressure line located?

I have the charging kit and now just want to locate where the quick-connect fitting goes.

Could you please elaborate on charging the a/c? What kit did you buy and give me a description of the steps you followed along with precautions. I need to charge my 95' 850 GLT Wagon's a/c and this time do not want to take it to the dealer. I am very handy but have never done this and therefore your...

May sound crazy, but check your tires. If rattle is only on slow speed and tires are worn then that may a possibility. In this situation the rattle goes away at high speed. I was told a belt inside the tire is about to come off. Tire replacement did the magic for me. I am no expert just sharing my p...

Thank you dosbricks and Matt for your advice. I guess I will replace the 5th lock and learn to live without a remote and save the money.

95' 850 GLT Wagon (non-turbo) 1. Central Locking: Front 4 door locks work fine. Problem is with the 5th door lock. When using the key in the front doors the 5th door lock does not operate. When using the key with the 5th door all the doors lock and unlock just the way they are supposed to. I need ad...

95' 850 GLT Wagon Folks, $63 and 40 minutes later the struts are fixed. Thanks to this forum, I saved about $240. I did not have to remove any lights, just opened the speaker grill, pulled out the plastic and used a screw driver to yank the ball joints of the strut, put in the new one and ready to g...

Take nose plier, push into the ring and then open the pliers such that the ring opens up.

Worked for me like a charm.