Then not the master cylinder, they go right to the floor where they barely work. But, I found, the brakes tend to build up pressure if you pump them, that's why I was leaning toward the vacuum pump. I can't find any vacuum leaks but I did just order an icarsoft reader for the car in hopes I find out...

04 xc90 2.5t No access to Vida :( Anti skid service message and the brakes will goto the floor. No loss of brake fluid and changed the vacuum pump. It seems like a vacuum leak but everything looks good. The message and brakes are hand in hand, only get the message when the brakes goto floor. Any ide...

Did not check the ground but highbeam is now gone on the driver side. Need to check the fuses again and see what happened. Could it be a possible ecm failure? Are they plug and play in s70s without programming with same numbers?

After having a headlight out, I changed the bulb with no luck and checked the fuses, 21 & 22. Highbeams, parking and taillights work fine.. Got out the tester and I have no power to the headlight. I hate electric issues, never had any luck. The headlight plug has has power on green but not on bl...

Good day all, I need to replace a cam seal that was installed incorrectly on my end, on the sprocket side. 2002 volvo xc I'm going to replace all 3 while I'm have the timing cover already lifted. But I'm getting myself confused when selecting the seals- I replaced the head gasket a few months ago wi...

It's fixed. Control arm was not as tight as it should have been. I put that on in January and I'm guessing it wasn't torqued correctly. It did not tighten much at all but made all the difference, now no noise at all. I'm thrilled I threw a bunch of money and my weekends at this for the past couple o...

I think it is the control arm, I think one of the bolts is not tight. I replaced them in January and a few weeks ago started the clicking. I assumed it to be coming from the axle since the clamp on the boot broke and I lost grease. I refilled the boot and reclamped until I got the new axles and the ...

Maybe this will help??

Axle bolt replaced with the ball joint on Monday

Not full lock but close. I would like to try to get a video of it. 199k