Thank you binglax09, appreciate for your reply and info.

Hello all. I have 1996 850 GLT, is there any reason for this models to not have the air pump? if 1996 models are without air pump then what's the reason? I'm confused here because some part supplier like FCP have the air pump for 1996 850 GLT. Is there any exception? Thank you all for any possible a...

Thank you scot850 for your concern and helpful info I have a plan to start working on it as soon as I had time to do.
Thanks again.
Art.

Hello all I have a 1996 850 GLT wagon. In cold whether I can't control the direction of warm air to the windshield by adjusting the knobs. there is very little air coming out of windshield defogger air holes and makes it difficult to drive for at least 30 min. and then when inside the car get warm t...

Hi everyone. since I bought my 1996 850 GLT I had and have Idle problem with my car. I know the idle rpm should be around 850 rpm but it's stays at 1000. The car runs good, no air leak, replaced idle control valve, clean throttle body and MAF but so far no changes on idle condition. Turning the AC o...

In this case many people gave the right answers. I just want to remind only. check the oil when car is parked in level driveway or street it is very important for 850's and similar models to be in a level surface parked when you want check the oil. I had and have several deferent cars non of them ha...

Lubricating a worn bearing or bushing will not solve your noisy blower problem because of its age it might remain quiet for some time but not for long, my recomendation is replace the blower and save your time I did lubricate not my Volvo's fan but several other like fans with no long lasting result.

Prevent possible permanent damages to sensitive electronic parts install in the car like ECM, ABS and so... Disconnect battery cable and then do the welding, I have more than 40 years of experience of reparing electronic stuff and I know welding the car body might send a shock to that sensitive part...

It is possible to repare the door by using machine screw but you have to have some bases to do I did my passgr. door with a very good result, there was a crack around outer side of door stoper in early stage of this common problem so I made five proper size of hole and used high strenght alloy machi...

Last month I replaced my 1996 850 brake rotor and pads, the rotors was original at 125k I don't know how many time but the prev. owner changed the pads before I bought the car, about %80 left, but because I wanted to do the complete brake job I changed the pads too. When I checked the removed pads t...