Hi folks ,back again ,this time the check engine light came on .Scanned a P102 code - mass or volume circuit low input .Is this a possible MAF issue ?I replaced the old 0ne about 10 months ago . any diagnostic advice or help ? 1998 S70 GLT Thanks

The bolts holding the lock to the door ?and or the bolts under the plastic cover hiding the door handle mount bolts ? I got this far ,but when I start to move the handle it feels like its still attached in there somewhere .I'll look further into it tomorrow ,wether permitting .Thanks
Billy I

I have the door panel off .What connects the door handle to the door lock ? I see a lever moving towards the lock ,but it's not contacting anything .Where is the rod located ?

Can someone give me some direction/ideas as to why the drivers side ,front door on my 1998 S70GLT won't open when using the outside door handle ? Please .The inside door release works fine .Thanks in advance .
Billy I.

1998 S70 GLT with 213K on the clock The front pass. door lock stopped working .The door can be opened by using the inside release handle only .The outside handle moves through it's normal range ,but nothing happens .I removed the interior door panel to get a view/access to the door lock /handle oper...

thanks all ! Good explanation on immobilizer circuitry .I had no ground to the start relay coil windings (because the alarm was armed) duh !After reading the posts and owners manual I realized what was going on ,locked and unlocked the door and the starter works fine .THere are 2 relays under the su...

Thanks Lee .Is the 210/211 relay a double relay like the 104/108 ,101/102 relays found under the supplementary fuse box cover ?Once the pins are jumped does the relay(s) get plugged back in ,or is it just left out ? Do you know if the alarm actually keeps the car from starting ?

...Bill

does anyone know if the factory alarm actually disables the car from starting ? If so is there a way to disable the system without affecting other car functions? My kid had a dead battery/jump start episode .Apparently the sequence of events (dead battery ,unlocked doors ,ignition left on ,etc.) tri...

release(push in ,then slide out ) side locking tabs ,then slide the radio out .simple ,thank again Bill

thanks I'll give it a shot