Really like the help I've gotten here. Has anyone had any experience with the part numbers on these pump. The model number on my pump is 8649681. http://en.bildelsbasen.se/global/images/image.php?src=/mnt/newftp/122/bil/lgnr/659580_2.jpg&width=&height= Which I've looked everywhere and the pa...

I'm in need of a fuel pump assembly for a 01 S60 2.4T. The one with the plastic tank. If you have one PM me.

Are there any epoxies or other materials that could plug the hole? It would be a lot cheaper this way. I've look at it and the hole is pretty small but it's inside the circular piece that protrudes through the top of the pump.

I bought the car used back in 2010 so I never got a letter. Also it is leaking gas around the pump so looks like I'm gona have to replace it. Are there any pumps out there that are built better then the OEM's?

I'll have to tear down into the fuel pump I guess. Is there a way to maybe just get a hold of the plastic piece? I highly doubt they will replace it for free since the cars 13 years old now.

I've got an 01 S60 2.4T that seems to have developed a gas smell that is pretty strong on the passenger side of the car. I've already taken the backseat out of the car to check around the fuel pump and it's not leaking. The lines don't seem to be leaking either. There doesn't seem to be a gas leak f...

The mechanisms to open and close the moonroof are broken. Some of the little pieces too that help guide it backwards too. I'm just trying to find out how or if it can be sealed up with something aftermarket or what.

I've got a busted sunroof on my 01 S60. I've been trying to find something to completely seal up the sunroof or some kind of cheap replacement. Possibly just a manual pop-up sunroof? If anyone knows of anything to help I'd appreciate it.

http://www.v70xc.com/resources/how-to/pdf/inner-tie-rods.pdf This is the best write up on how to do tie rods. Everything is almost identical to the S60 except the outer tie rods. Disconnecting the outer tie rod from the inner and wheel is a bit different. You'll probably have to break the nut that h...